English
Language : 

PAS005B Datasheet, PDF (9/41 Pages) Pixart Imaging Inc. – SXGA Color/Mono Digital CMOS Image Sensor
◁
PixArt Imaging Inc.
PAS005B
CMOS Image Sensor IC
Reg_54[3]
extR_EnH
R/W
Reg_54[2]
bgp_EnH
R/W
Reg_54[1]
ext2p5v_EnH
R/W
Reg_54[0] 2p5vNdrv_EnH R/W
Reg_55[0]
sfpd
R/W
Reg_56[0]
soft_rst
R/W
Reg_57[3]
Dac_B_sign_
ABC
R
Reg_57[2]
Dac_G1_sign_
ABC
R
Reg_57[1]
Dac_G0_sign_
ABC
R
Reg_57[0]
Dac_R_sign_
ABC
R
Reg_58[7:0] Dac_B_ABC[7:0]
R
Reg_59[7:0] Dac_G1_ABC[7:0] R
Reg_60[7:0] Dac_G0_ABC[7:0] R
Reg_61[7:0] Dac_R_ABC[7:0]
R
Reg_62[4:0] acc1_B_FrmAvg[12:8] R
Reg_63[7:0] acc1_B_FrmAvg[7:0] R
Reg_64[4:0]
acc1_G1_FrmAvg[12:8
]
R
Reg_65[7:0] acc1_G1_FrmAvg[7:0] R
Reg_66[4:0]
acc1_G0_FrmAvg[12:8
]
R
Reg_67[7:0] acc1_G0_FrmAvg[7:0] R
Reg_68[4:0] acc1_R_FrmAvg[12:8] R
Reg_69[7:0] acc1_R_FrmAvg[7:0] R
0
Bias current generated by external resistor enable
high
0 Bandgap reference enable high
0 External 2.5V digital power enable high
0 X_VDDD with NMOS drive enable high
software power down:
0 Sensor core will be powered down if it is set to 1 but
I2C interface will be live.
0
software reset:
It is used to reset the full registers to default value.
0
The converge sign of color B when ABC is enable
0
The converge sign of color G1 when ABC is enable
0
The converge sign of color G0 when ABC is enable
0
The converge sign of color R when ABC is enable
0 The converge value of color B when ABC is enabled
0
The converge value of color G1 when ABC is
enabled
0
The converge value of color G0 when ABC is
enabled
0 The converge value of color R when ABC is enabled
0
The converge value of color B when frame based
digital calibration is enabled.
0
The converge value of color B when frame based
digital calibration is enabled.
0
The converge value of color G1 when frame based
digital calibration is enabled.
0
The converge value of color G1 when frame based
digital calibration is enabled.
0
The converge value of color G0 when frame based
digital calibration is enabled.
0
The converge value of color G0 when frame based
digital calibration is enabled.
0
The converge value of color R when frame based
digital calibration is enabled.
0
The converge value of color R when frame based
digital calibration is enabled.
0
Part_ID[11:4]
1
Part_ID[3:0]
VerID
2
Np_i2c[3:0]
3
Np[5:0]
4
single_ cm
path
5
rrc
rrr
cf[1:0]
rf[1:0]
wcp_in[10:8]
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail: fae_service@pixart.com.tw
R
R
R/W
R/W
R/W
R/W
 ▷