ADNS-3090 Datasheet, PDF (9/38 Pages) Pixart Imaging Inc. – High-Performance Optical Mouse Sensor

PixArt Imaging Inc.
E^ͲϯϬϵϬ,ŝŐŚͲWĞƌĨŽƌŵĂŶĐĞKƉƚŝĐĂůDŽƵƐĞ^ĞŶƐŽƌ
Enabling the SROM
For best tracking performance,SROM is required to
be loaded into ADNS-3090. This architecture enables
immediate adoption of new features and improved per-
formance algorithms. The external program is supplied
by PixArt Imaging as a file which may be burned
into a programmable device. A micro-controller with
sufficient memory may be used. On power-up and reset,
the ADNS-3090 program is downloaded into volatile
memory using the burst-mode procedure described in
the Synchronous Serial Port section. The program size
is 1986 x 8 bits.
Regulatory Requirements
 Passes FCC B and worldwide analogous emission limits
when assembled into a mouse with shielded cable and
following PixArt Imaging’ recommendations.
 Passes IEC-1000-4-3 radiated susceptibility level when
assembled into a mouse with shielded cable and fol-
lowing PixArt Imaging’ recommendations.
 Passes EN61000-4-4/IEC801-4 EFT tests when assem-
bled into a mouse with shielded cable and following
PixArt Imaging’ recommendations.
 UL flammability level UL94 V-0.
 Provides sufficient ESD creepage/clearance distance
to avoid discharge up to 15kV when assembled into a
mouse according to usage instructions above.
Sensor
Lens
2.40
0.094
Object Surface
Figure 9. Distance from lens reference plane to surface
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail: [e-mail]
9