TMC81C01A Datasheet, PDF (13/13 Pages) PHOENIX CONTACT – Thermal magnetic UL 489 miniature circuit breakers

4
3
2
R
1
91
94
92
TMC ^{81C 20A1}
I OONOFF
2
I cu=10KA
4
1
TMC 8...
Figure 10 Accessory installation
4. Place the accessory in position on the left side of the
TMC 8... making sure to align the locking clips (1), latch
(2), and switch handle (3) with the TMC 8....
5. Reinstall the end pieces (4) previously removed.
NOTE:
The end pieces must be installed to maintain
UL 489 compliance.
6. Install on the mounting rail, and connect wires, as
required.
5.6 Busbars and related accessories
Busbars can be purchased for 1-, 2-, and 3-pole circuit
breakers. They are also available to accommodate the
circuit breakers if either the TMC 7/8 AUX or TMC 7/8
ALARM is used.
connection to the busbar without increasing the installation
space on the mounting rail.
59,3
16,4
85
Figure 12 TMC 8 B TERM PIN dimensions
19,3
1,8
5
17,8
Figure 11 TMC 8 B1... dimensions
Busbars come in lengths of approximately 1 m and can be
cut to the desired length. Optional supply terminal allows
3644_en_A
PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany
phoenixcontact.com
13/13