TDA8060ATS Datasheet, PDF (6/16 Pages) NXP Semiconductors – Satellite ZERO-IF QPSK down-converter

Philips Semiconductors
Satellite ZERO-IF QPSK down-converter
Product specification
TDA8060ATS
AC CHARACTERISTICS
T_amb = 25 °C; V_CC = 5 V; unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS MIN. TYP. MAX. UNIT
Quadrature generator
f_osc
oscillator frequency
note 1
920 −
2200 MHz
ΦN_osc
oscillator phase noise
at 10 kHz offset; −
note 2
−80 −75 dBc/Hz
∆Φ
absolute quadrature error
note 4
−
0
3
deg
f_LOOUT
output frequency
V_PEN = 0 V
V_PEN = V_CC
−
f_osc −
−
1_{⁄2fosc −}
V_{o(diff)(LOOUT)}
differential output voltage at pin LOOUT
R_L = 100 Ω
differential
−30 −22 −
dBm
R_2H
Z_{o(diff)(LOOUT)}
second harmonic rejection
note 3
differential output impedance at pin LOOUT
−
30 −
dBc
−
60 −
Ω
Conversion stage
R_i(diff)
L_i(diff)
P_i(max)
P_i(min)
∆G_v/∆V_(slope)
∆G_v(I-Q)
∆t_{d(g)(RF-IOUT)}
∆t_{d(g)(RF-QOUT)}
t_{d(g)(I-Q)(40)}
B_{(−1dB)(RF-IOUT)}
B_{(−1dB)(RF-QOUT)}
B_{(−3dB)(RF-IOUT)}
B_{(−3dB)(RF-QOUT)}
Z_o(IOUT)
Z_o(QOUT)
V_o(IOUT)
V_o(QOUT)
R_L(IOUT)
R_L(QOUT)
series real part of differential input
impedance at pins RFA and RFB
note 5
−
34 −
Ω
series inductance of differential input
impedance at pins RFA and RFB
note 5
−
5
−
nH
maximum input power per channel
−
−25 −
dBm
minimum input power per channel
−
−62 −60 dBm
AGC slope
at G_{v(RF-IOUT)(min)} −
30 43 dB/V
voltage gain mismatch between I and Q
−
−
1
dB
group delay variation per channel (40 MHz)
from RF input to pin IOUT
−
0.5 2
ns
group delay variation per channel (40 MHz)
from RF input to pin QOUT
−
0.5 2
ns
group delay mismatch per channel (40 MHz)
between I and Q
−
0
0.5 ns
channel −1 dB bandwidth from RF input to
pin IOUT
−
40 −
MHz
channel −1 dB bandwidth from RF input to
pin QOUT
−
40 −
MHz
channel −3 dB bandwidth from RF input to
pin IOUT
−
70 −
MHz
channel −3 dB bandwidth from RF input to
pin QOUT
−
70 −
MHz
output impedance at pin IOUT
−
65 −
Ω
output impedance at pin QOUT
−
65 −
Ω
nominal output voltage level at pin IOUT
per channel
−
28 −
dBmV
nominal output voltage level at pin QOUT per channel
−
28 −
dBmV
resistive load at pin IOUT
400 −
−
Ω
resistive load at pin QOUT
400 −
−
Ω
2000 Nov 10
6