74HC_HCT166_15 Datasheet, PDF (6/21 Pages) NXP Semiconductors – 8-bit parallel-in/serial out shift register

NXP Semiconductors
74HC166; 74HCT166
8-bit parallel-in/serial out shift register
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V)
Symbol Parameter
Conditions
Min
Max
Unit
V_CC
supply voltage
0.5
+7
V
I_IK
input clamping current
V_I < 0.5 V or V_I > V_CC + 0.5 V
[1] _-
20
mA
I_OK
output clamping current
V_O < 0.5 V or V_O > V_CC + 0.5 V
[1] _-
20
mA
I_O
output current
0.5 V < V_O < V_CC + 0.5 V
-
25
mA
I_CC
I_GND
T_stg
P_tot
supply current
ground current
storage temperature
total power dissipation
T_amb = 40 C to +125 C
DIP16 package
-
50
65
[2] _-
50
mA
-
mA
+150
C
750
mW
SO16 package
[3] _-
500
mW
(T)SSOP16 package
[4] _-
500
mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] P_tot derates linearly with 12 mW/K above 70 C.
[3] P_tot derates linearly with 8 mW/K above 70 C.
[4] P_tot derates linearly with 5.5 mW/K above 60 C.
74HC_HCT166
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 11 September 2013
© NXP B.V. 2013. All rights reserved.
6 of 21