74ABT161543 Datasheet, PDF (5/12 Pages) NXP Semiconductors – 16-bit latched transceiver with dual enable and master reset 3-State

Philips Semiconductors
16-bit latched transceiver with dual enable
and master reset (3-State)
LOGIC DIAGRAM
nA0
D
Q
LE R
DETAIL A
Q
D
R LE
Product specification
74ABT161543
74ABTH161543
nB0
nA1
nA2
nA3
nA4
nA5
nA6
nA7
MRab
nOEBA
nEBA
nLEBA
DETAIL A X 7
nB1
nB2
nB3
nB4
nB5
nB6
nB7
MRba
nOEAB
nEAB
nLEAB
SH00062
ABSOLUTE MAXIMUM RATINGS^{1, 2}
SYMBOL
PARAMETER
CONDITIONS
RATING
UNIT
V_CC
I_IK
V_I
I_OK
V_OUT
I_OUT
DC supply voltage
DC input diode current
DC input voltage³
DC output diode current
DC output voltage³
DC output current
V_I < 0
V_O < 0
output in Off or High state
output in Low state
output in High state
–0.5 to +7.0
V
–18
mA
–1.2 to +7.0
V
–50
mA
–0.5 to +5.5
V
128
mA
–64
mA
T_stg
Storage temperature range
–65 to 150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
1998 Feb 27
5