LPC4350_12 Datasheet, PDF (38/149 Pages) NXP Semiconductors – 32-bit ARM Cortex-M4/M0 MCU; up to 264 kB SRAM; Ethernet; two High-speed USBs; advanced configurable peripherals

NXP Semiconductors
LPC4350/30/20/10
32-bit ARM Cortex-M4/M0 microcontroller
Table 3. Pin description …continued
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
Description
P9_2
P9_3
P9_4
N8 x -
M6 x -
N10 x -
70 -
79 -
92 -
- ^[3] I; PU I/O GPIO4[14] — General purpose digital input/output
pin.
O MCOB2 — Motor control PWM channel 2, output B.
- R — Function reserved.
- R — Function reserved.
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the
transmitter and read by the receiver. Corresponds to
the signal SD in the I²S-bus specification.
I ENET_RXD3 — Ethernet receive data 3 (MII
interface).
I/O SGPIO2 — General purpose digital input/output pin.
I/O SSP0_MOSI — Master Out Slave in for SSP0.
- ^[3] I; PU I/O GPIO4[15] — General purpose digital input/output
pin.
O MCOA0 — Motor control PWM channel 0, output A.
O USB1_IND1 — USB1 Port indicator LED control
output 1.
- R — Function reserved.
- R — Function reserved.
I ENET_RXD2 — Ethernet receive data 2 (MII
interface).
I/O SGPIO9 — General purpose digital input/output pin.
O U3_TXD — Transmitter output for USART3.
- ^[3] I; PU - R — Function reserved.
O MCOB0 — Motor control PWM channel 0, output B.
O USB1_IND0 — USB1 Port indicator LED control
output 0.
- R — Function reserved.
I/O GPIO5[17] — General purpose digital input/output
pin.
O ENET_TXD2 — Ethernet transmit data 2 (MII
interface).
I/O SGPIO4 — General purpose digital input/output pin.
I U3_RXD — Receiver input for USART3.
LPC4350_30_20_10
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3.1 — 5 January 2012
© NXP B.V. 2012. All rights reserved.
38 of 149