TDA6106Q Datasheet, PDF (3/12 Pages) NXP Semiconductors – Video output amplifier

Philips Semiconductors
Video output amplifier
Product specification
TDA6106Q
PINNING
SYMBOL PIN
DESCRIPTION
n.c.
1 not connected
n.c.
2 not connected
V_in
GND
3 inverting input voltage
4 ground, substrate
I_om
5 black current measurement output
V_DD
6 supply voltage
n.c.
7 not connected
V_oc
8 cathode output voltage
V_of
9 feedback output voltage
handbook, halfpage
n.c. 1
n.c. 2
Vin 3
GND 4
Iom 5 TDA6106Q
VDD 6
n.c. 7
Voc 8
Vof 9
MBG342
Fig.2 Pin configuration.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134); voltages with respect to pin 4 (ground) unless
otherwise specified; currents specified as in Fig.1.
SYMBOL
PARAMETER
CONDITIONS
V_DD
supply voltage
V_in
inverting input voltage
V_om
black current measurement output voltage
V_oc
cathode DC output voltage
V_of
feedback output voltage
I_oc(l)
low non-repetitive peak cathode output flashover discharge = 100 µC;
current
note 1
I_oc(h)
high non-repetitive peak cathode output flashover discharge = 100 nC;
current
note 2
P_max
T_stg
T_j
V_esd
maximum power dissipation
storage temperature
junction temperature
electrostatic discharge
note 3
note 4
MIN.
0
0
0
0
0
0
0
0
−55
−20
−2 000
−300
MAX.
250
8
6
V_DD
V_DD
5
UNIT
V
V
V
V
V
A
10
A
tbf
W
+150 °C
+150 °C
+2000 V
+300 V
Notes
1. The cathode output is protected against peak currents (caused by positive voltage peaks during high-resistance
flash) of 5 A maximum with a charge content of 100 µC.
2. The cathode output is also protected against peak currents (caused by positive voltage peaks during low-resistance
flash) of 10 A maximum with a charge content of 100 nC.
3. Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 kΩ resistor.
4. Machine model: equivalent to discharging a 200 pF capacitor through a 0 Ω resistor.
1997 Mar 03
3