TDA6106Q Datasheet, PDF (2/12 Pages) NXP Semiconductors – Video output amplifier

Philips Semiconductors
Video output amplifier
Product specification
TDA6106Q
FEATURES
• No external heatsink required
• Black current measurement output for Automatic Black
current Stabilization (ABS)
• Internal 2.5 V reference circuit
• Internal protection against positive appearing CRT
flashover discharges
• Single supply voltage of 200 V
• Simple application with a variety of colour decoders
• Controlled switch-off behaviour.
GENERAL DESCRIPTION
The TDA6106Q is a monolithic video output amplifier with
a 6 MHz bandwidth and is contained in a 9-lead plastic
DIL-bent-SIL medium power package. The device uses
high-voltage DMOS technology and is intended to drive
the cathode of a CRT. To obtain maximum performance,
the amplifier should be used with black current control.
ORDERING INFORMATION
TYPE NUMBER
TDA6106Q
NAME
DBS9MPF
PACKAGE
DESCRIPTION
plastic DIL-bent-SIL medium power package with fin; 9 leads
VERSION
SOT111-1
BLOCK DIAGRAM
handbook, full pagewidth
n.c. ¹
n.c. ²
n.c. ⁷
supply voltage
6
feedback
output
9
MIRROR 1
in
out
Vbias
1×
MIRROR 2
out
in
1×
8 cathode
output
TDA6106Q
inverting 3
input
−
DIFFERENTIAL
STAGE
+
CURRENT
SOURCE
5
black current
measurement
output
1997 Mar 03
out
out
out
out
in
MIRROR 3
Fig.1 Block diagram.
2
gnd
4
ground
(substrate)
MBG343