|
SA5211 Datasheet, PDF (2/20 Pages) NXP Semiconductors – Transimpedance amplifier 180MHz | |||
|
◁ |
Philips Semiconductors
Transimpedance amplifier (180MHz)
Product specification
SA5211
DESCRIPTION
The SA5211 is a 28k⦠transimpedance, wide-band, low noise
amplifier with differential outputs, particularly suitable for signal
recovery in fiber optic receivers. The part is ideally suited for many
other RF applications as a general purpose gain block.
FEATURES
⢠Extremely low noise: 1.8pA ŠǸHz
⢠Single 5V supply
⢠Large bandwidth: 180MHz
⢠Differential outputs
⢠Low input/output impedances
⢠High power supply rejection ratio
⢠28k⦠differential transresistance
APPLICATIONS
⢠Fiber optic receivers, analog and digital
⢠Current-to-voltage converters
⢠Wide-band gain block
PIN CONFIGURATION
D Package
GND2 1
GND2 2
NC 3
IIN 4
NC 5
VCC1 6
VCC2 7
14 OUT (â)
13 GND2
12 OUT (+)
11 GND1
10 GND1
9 GND1
8 GND1
TOP VIEW
SD00318
Figure 1. Pin Configuration
⢠Medical and scientific Instrumentation
⢠Sensor preamplifiers
⢠Single-ended to differential conversion
⢠Low noise RF amplifiers
⢠RF signal processing
ORDERING INFORMATION
DESCRIPTION
14-Pin Plastic Small Outline (SO) Package
TEMPERATURE RANGE
-40 to +85°C
ORDER CODE
SA5211D
DWG #
SOT108-1
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
VCC
Power supply
6
TA
Operating ambient temperature range
-40 to +85
TJ
Operating junction temperature range
-55 to +150
TSTG
PD MAX
IIN MAX
Storage temperature range
Power dissipation, TA=25°C (still-air)1
Maximum input current2
-65 to +150
1.0
5
θJA
Thermal resistance
125
NOTES:
1. Maximum dissipation is determined by the operating ambient temperature and the thermal resistance:
θJA=125°C/W
2. The use of a pull-up resistor to VCC, for the PIN diode is recommended.
UNIT
V
°C
°C
°C
W
mA
°C/W
1998 Oct 07
2
853-1799 20142
|
▷ |