English
Language : 

PDIUSBP11A Datasheet, PDF (2/12 Pages) NXP Semiconductors – Universal Serial Bus Transceiver
Philips Semiconductors
Universal Serial Bus transceiver
Product specification
PDIUSBP11A
FEATURES
• Complies with Universal Serial Bus specification 1.1
• Utilizes digital inputs and outputs to transmit and receive USB
cable data
• Supports 12Mbit/s “Full Speed” and 1.5Mbit/s “Low Speed” serial
data transmission
• Compatible with the VHDL “Serial Interface Engine” from USB
Implementers’ Forum
• Supports single-ended data interface
• Single 3.3V supply
• Available in SO-14, SSOP-14 and TSSOP-14 packages
DESCRIPTION
The PDIUSBP11A is a one chip generic USB transceiver. It is
designed to allow 5.0V or 3.3V programmable and standard logic to
interface with the physical layer of the Universal Serial Bus. It is
capable of transmitting and receiving serial data at both full speed
(12Mbit/s) and low speed (1.5Mbit/s) data rates.
The pinout conforms with the ”Serial Interface Engine”.
Implementation of the Serial Interface Engine along with the USB
transceiver allows the designer to make USB compatible devices
with off-the-shelf logic and easily modify and update the application.
The PDIUSBP11A is backward compatible to the PDIUSBP11 and
allows for single-ended data interfacing.
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
14-pin plastic SO
–40°C to +85°C
14-pin plastic SSOP
–40°C to +85°C
14-pin plastic TSSOP
–40°C to +85°C
OUTSIDE NORTH AMERICA
PDIUSBP11A D
PDIUSBP11A DB
PDIUSBP11APW
NORTH AMERICA
PDIUSBP11A D
PDIUSBP11A DB
PDUSBP11APW DH
PKG. DWG. #
SOT108-1
SOT337-1
SOT402-1
PIN CONFIGURATION
FUNCTIONAL DIAGRAM
MODE 1
OE# 2
RCV 3
VP 4
VM 5
SUSPND 6
GND 7
14 VCC
13 VMO/FSEO
12 VPO
11 D)
10 D–
9 SPEED
8 NC
SV00559
OE#
SPEED
VMO/FSEO
VPO
RCV
VP
VM
D–
D+
+
–
SV00560
1999 Jun 04
2
853-2008 21712