SA605_15 Datasheet, PDF (14/25 Pages) NXP Semiconductors – High performance low power mixer FM IF system

NXP Semiconductors
SA605
High performance low power mixer FM IF system
Table 9. Automatic test circuit component list
Component
Description
C1
33 pF NPO ceramic
C2
180 pF NPO ceramic
C3, C6
5 pF to 30 pF variable capacitor; Murata TZC3P300A 110R00
C5, C9, C11, C14, C17, 100 nF  10 % monolithic ceramic
C18, C21, C23
C7
1 nF ceramic
C8, C15
10 pF NPO ceramic
C10^[1]
6.8 F tantalum (minimum)
C12
15 nF  10 % ceramic
C13
150 pF  2 % N1500 ceramic
C26
390 pF  10 % monolithic ceramic
FL1
ceramic filter Murata SFG455A3 or equivalent
FL2
IFT1
330 H variable shielded inductor, Toko 836AN-0129Z
L1
330 nH Coilcraft 1008CS-331
L2
1.2 H Coilcraft 1008CS-122
X1
44.545 MHz 3rd Overtone series resonant crystal in the HC-49U case
R9
100 k  1 % 1/4 W metal film
R10, R11
100 k  1 % 1/4 W metal film (optional)
R17
5.1 k  5 % 1/4 W carbon composition
[1] This value can be reduced when a battery is the power source.
SA605
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 14 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
14 of 25