PDIUSBD11 Datasheet, PDF (11/20 Pages) NXP Semiconductors – USB device with serial interface

Philips Semiconductors
USB device with serial interface
Product specification
PDIUSBD11
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
V_CC
V_I
V_I/O
V_AI/O
V_O
T_amb
DC supply voltage
DC input voltage range
DC input voltage range for I/O
DC input voltage range for analog I/O
DC output voltage range
Operating ambient temperature range in free air
TEST CONDITIONS
See DC and AC characteristics per device
MIN MAX UNIT
3.0
3.6
V
0
5.5
V
0
5.5
V
0
V_CC
V
0
V_CC
V
–40
85
°C
ABSOLUTE MAXIMUM RATINGS¹
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
MAX
UNIT
V_CC
DC supply voltage
–0.5
+4.6
V
I_IK
DC input diode current
V_I < 0
–50
mA
V_I
DC input voltage
Note 2
–0.5
+5.5
V
V_I/O
DC input voltage range for I/O
–0.5 V_CC + 0.5
V
I_OK
DC output diode current
V_O > V_CC or V_O < 0
±50
mA
V_O
DC output voltage
Note 2
–0.5 V_CC + 0.5
V
I_O
DC output sink or source current for other pins V_O = 0 to V_CC
±15
mA
I_O
DC output sink or source current for D+/D– pins V_O = 0 to V_CC
±50
mA
I_GND, I_CC DC V_CC or GND current
±100
mA
T_STG Storage temperature range
–60
+150
°C
P_TOT Power dissipation per package
NOTES:
1. Stresses beyond those listed may cause damage to the device. These are stress ratings only and functional operation of the device at these
or any other conditions beyond those listed in the RECOMMENDED OPERATING CONDITIONS table is not implied. Exposure to absolute
maximum rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
DC CHARACTERISTICS (Digital pins)
SYMBOL
PARAMETER
Input Levels
V_IL
LOW level input voltage
VIH
HIGH level input voltage
V_TLH
LOW to HIGH threshold voltage
V_THL
HIGH to LOW threshold voltage
V_HYS Hysteresis voltage
Output Levels
V_OL
LOW level output voltage
V_OH
HIGH level output voltage
Leakage Current
I_OZ
OFF state current
I_L
Input leakage current
I_S
Suspend current
I_O
Operating current
TEST CONDITIONS
ST (Schmitt Trigger) pins
ST pins
ST pins
I_OL = rated drive
I_OL = 20 µA
I_OH = rated drive
I_OH = 20 µA
OD (Open Drain) pins
Oscillator stopped &
inputs to GND/V_CC
I²C operating
MIN
TYP MAX UNIT
0.6
V
2.7
V
1.4
1.9
V
0.9
1.5
V
0.4
0.7
V
2.4
V_CC – 0.1
10
0.4
V
0.1
V
V
V
±5
µA
±5
µA
15
µA
mA
1999 Jul 22
11