74HC165 Datasheet, PDF (10/10 Pages) NXP Semiconductors – 8-bit parallel-in/serial-out shift register

Philips Semiconductors
8-bit parallel-in/serial-out shift register
Product specification
74HC/HCT165
CE may change only from HIGH-to-LOW while CP
is LOW.
The shaded areas indicate when the input is
permitted to change for predictable output
performance.
(1) HC : V_M = 50%; V_I = GND to V_CC.
HCT: V_M = 1.3 V; V_I = GND to 3 V.
Fig.9 Waveforms showing the set-up and hold times from the serial data input (D_s) to the clock (CP) and clock
enable (CE) inputs, from the clock enable input (CE) to the clock input (CP) and from the clock input (CP)
to the clock enable input (CE).
(1) HC : V_M = 50%; V_I = GND to V_CC.
HCT: V_M = 1.3 V; V_I = GND to 3 V.
Fig.10 Waveforms showing the set-up and hold times from the data inputs (D_n) to the parallel load input (PL).
PACKAGE OUTLINES
See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.
December 1990
10