PI3HDMI412FT-A Datasheet, PDF (9/12 Pages) Pericom Semiconductor Corporation – 2:1 Mux/DeMux High Bandwidth (> 5 Gbps) HDMI 1.3 Compliant Signal Switch

PI3HDMI412FT-A
2:1 Mux/DeMux High BW (> 5 Gbps)
HDMI 1.3 Compliant Signal Switch
Fig 7. TP3 (Rx) with 2-meter cable eye measurements
(Right eye is with no switch. Left eye is with switch.)
Test Circuit for Electrical Characteristics
V_DD
2 x V_DD
Pulse
V_IN
Generator
R_T
D.U.T
V_OUT
200-ohm
4pF
C_L
200-ohm
Notes:
1. C_L = Load capacitance: includes jig and probe capacitance.
2. R_T = Termination resistance: should be equal to Z_OUT of the Pulse Generator
3. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
4. All input impulses are supplied by generators having the following characteristics: PRR ≤ MHz, Z_O = 50Ω, t_R ≤ 2.5ns, t_F ≤ 2.5ns.
5. The outputs are measured one at a time with one transition per measurement.
Switch Positions
Test
t_PLZ, t_PZL
t_PHZ, t_PZH
Prop Delay
Switch
2 x (V_DD - V_SS)
V_SS
Open
06-0309
9
PS8831C
12/18/06