PI3WVR31313A Datasheet, PDF (8/27 Pages) Pericom Semiconductor Corporation – DP/HDMI 1:3 De-multiplexer switches

PI3W VR31313A
DP/HDMI 1:3 De-multiplexer switches
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ........................................................... –65°C to +150°C
Note: Stresses greater than those listed under MAXI-
MUM RATINGS may cause permanent damage to the de-
Supply Voltage to Ground Potential ....................................–0.5V to +4.6V _{vice. This is a stress rating only and functional operation}
High Speed Channel Input Voltage (DP Mode)........................–0.5V to 2V of the device at these or any other conditions above those
DDC and HPD channels Input Voltage ....................................–0.5V to 6V ^{indicated in the operational sections of this specification is}
DC Output Current ..............................................................................180mA
not implied. Exposure to absolute maximum rating condi-
tions for extended periods may affect reliability.
Power Dissipation .................................................................................... 0.6W
Electrical Characteristics
Recommended Operation Conditions
V_DD = 3.3V ±10%, Min and Max apply for T_A between -40^oC to 85^oC Typical values are referenced to T_A = 25^oC
Parameter
V_DD
I_DD
I_DDQ
Istb
Isd1
Isd2
Description
Operating Voltage
VDD supply current
(Port1 or 2 active)
VDD Supply Current
(Port3 active)
VDD Quiescent Supply Current
(port3 active w/o TMDS input)
Standby mode by I2C
Supply shut down current when
OEB disable (MS=0)
Supply shut down current when
OEB disable (MS=1)
Test Conditions
Min. Typ.
3.0
3.3
VDD=3.3V
1
Output Enable ( open drain 500mv
signal-end 0dB pre-emphasis, not
80
including 40mA current to source)
Output Enable ( double termination,
500mv signal-end 0dB pre-empha-
sis, not including 40mA current to
160
source)
TMDS Output Disable
3.5
VDD=3.6V, OEB = Low, Port1/2/3
selection, HPD_1,2,3=0, MS=1
0.6
V_DD=3.6V, OEB=high
0.1
V_DD=3.6V, OEB=high
0.6
Max.
3.6
1.8
100
200
5
1.2
0.2
1.2
Unit
V
mA
mA
mA
mA
mA
uA
mA
All trademarks are property of their respective owners.
15-0162
8
www.pericom.com 12/03/15