PI3HDMI101ZHEX Datasheet, PDF (7/14 Pages) Pericom Semiconductor Corporation – 1:1 Active HDMI™ ReDriver™ with Optimized Equalization & I2C Buffer

ADVANCE INFORMATION - COMPANY CONFIDENTIAL
PI3HDMI101
1:1 Active HDMI^TM Redriver with
Optimized Equalization & I²C Buffer
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature .................................................... –65°C to +150°C
Supply Voltage to Ground Potential................................–0.5V to +4.0V
DC Input Voltage ...............................................................–0.5V to V_DD
DC Output Current....................................................................... 120mA
Power Dissipation ........................................................................... 1.0W
Note:
Stresses greater than those listed under MAXIMUM RATINGS
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to ab-
solute maximum rating conditions for extended periods may
affect reliability.
Recommended Operating Conditions
Symbol Parameter
Min.
Typ.
V_DD
Supply Voltage
3.135
3.3
T_A
Operating free-air temperature
0
TMDS Differential Pins
V_ID
Receiver peak-to-peak differential input voltage
150
V_IC
Input common mode voltage
2
V_DD TMDS output termination voltage
3.135
3.3
R_T
Termination resistance when RxSense pin is HIGH
45
50
TMDS Data
Rate
Signaling rate
0.25
Control Pins (OC_Sx, EQ_Sx, OE, DDC_EN)
V_IH LVTTL High-level input voltage
2
V_IL
LVTTL Low-level input voltage
DDC Pins (SCL_R, SCL_T, SDA_R, SDA_T)
GND
V_I(DDC) Input voltage
I²C Pins (SCL_T, SDA_T)
GND
V_IH High-level input voltage
0.7 x V_DD
V_IL
Low-level input voltage
-0.5
V_ICL Low-level input voltage contention ⁽¹⁾
-0.5
I²C Pins (SCL_R, SDA_R)
V_IH High-level input voltage
0.7 x V_DD
V_IL
Low-level input voltage
-0.5
Max.
3.465
70
1560
V_DD + 0.01
3.465
55
2.5
Units
V
°C
mVp-p
V
ohm
Gbps
V_DD
V
0.8
5.5
V
5.5
0.3 x V_DD
V
0.4
5.5
V
0.3 x V_DD
Note:
1. VIL specification is for the first low level seen by the SCL/SDA lines. V_ICL is for the second and subsequent low levels seen by the
TSCL/TSDA lines.
All trademark⁰s⁹a^-r⁰e⁰p⁵ro⁵perty of their respective owners.
7
PS8924C
10/05/09