PI3WVR12612 Datasheet, PDF (6/13 Pages) Pericom Semiconductor Corporation – HDMI 2.0, DisplayPort 1.2 Video Switch

PI3W VR12612
HDMI 2.0, DisplayPort 1.2 Video Switch
Power Supply Characteristics (T_A = –40°C to +105°C)
Parameter Description
Test Conditions⁽¹⁾
Min Typ⁽²⁾
I_DD
Power Supply Current
V_DD = 3.3V, V_IN = GND or V_DD
1
I_DD,Off
Power Supply Current, Disabled
V_DD = 3.3V, V_IN = GND or V_DD,
V_OE < V_IL
1
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at V_DD = 3.3V, T_a = 25°C ambient and maximum loading.
Max
3
50
Units
mA
µA
Dynamic Electrical Characteristics over Operating Range (T_A = -40º to +105ºC, V_DD = 3.3V ±10%)
Parameter Description
Test Conditions¹
Min _Typ2 MAX _Units
X_TALK
Crosstalk on High Speed Chan-
nels
See Fig. 1 for Measure-
ment Setup
f= 3.0 GHz
f= 2.7 GHz
f = 1.35 GHz
-25 -22
-28 -25
-32 -28
O_IRR
OFF Isolation on High Speed
Channels
See Fig. 2 for Measure- _{f= 3.0 GHz}
ment Setup,
f= 2.7 GHz
f = 1.35 GHz
-24 -20 _dB
-25 -22
-30 -27
I_LOSS
Differential Insertion Loss on
High Speed Channels
@6.0Gbps (see figure 4)
@5.4Gbps (see figure 3)
-2.3 -2.0
dB
-2.0 -1.8
R_loss
BW_Dx±
BW_AUX/
HPD
Differential Return Loss on high ^{@3.0GHz (6.0Gbps)}
speed channels
@ 2.7GHz (5.4Gbps)
Bandwidth -3dB for Main high
speed path (Dx±)
-3dB BW for AUX, DDC, and
HPD signals
See figure 3
See figure 3
-12
-14
3.7 4.1
1.35 1.5
-11
dB
-12.5
GHz
GHz
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at V_DD = 3.3V, T_a = 25°C ambient and maximum loading.
Switching Characteristics (TA= -40º to +105ºC, VDD = 3.3V±10%)
Parameter
Description
T_pd
tb-b
tch-ch
Tsw a-b
Propagation delay (input pin to output pin) on Dx± channels
Bit-to-bit skew within the same differential pair of Dx± channels
Channel-to-channel skew of Dx± channels
time it takes to switch from port A to port B
Tsw b-a
time it takes to switch from port B to port A
Tstartup
Vdd valid to channel enable
Twakeup
Enabling output by changing OE from low to High
Min.
Typ.
80
5
Max.
7
35
0.1
0.1
10
10
Units
ps
ps
ps
us
us
us
us
All trademarks are property of their respective owners.
15-0175
6
www.pericom.com 12/03/15