PI3WVR12612 Datasheet, PDF (1/13 Pages) Pericom Semiconductor Corporation – HDMI 2.0, DisplayPort 1.2 Video Switch

PI3WVR12612
HDMI 2.0, DisplayPort 1.2 Video Switch
Features
ÎÎ4-lane, 1:2 mux/demux that will support RBR, HBR1, or
HBR2
ÎÎData rate: 3.4 Gbps to 6.0 Gbps for high data channels
ÎÎ1-channel 1:2 mux/demux for HPD signal
ÎÎDifferential switch matrix for DP AUX and HDMI DDC
ÎÎsupports 720 Mbps high-speed DP AUX
ÎÎ-2.0 dB Insertion Loss for Dx channels @ 3 GHz
ÎÎ-3 dB Bandwidth for Dx channels: 4.1 GHz
ÎÎReturn loss for Dx channels @ 3 GHz: -12 dB
ÎÎLow Crosstalk for high speed channels: -25 dB@ 6 Gbps
ÎÎLow Off Isolation for high speed channels: -24dB@ 6 Gbps
ÎÎLow channel-to-channel skew, 35ps max
ÎÎLow Bit-to-Bit Skew, 5ps typ (between '+' and '-' bits)
ÎÎV_DD Operating Range: 3.3V +/-10%
ÎÎESD Tolerance: 2kV HBM
ÎÎPackaging (Pb-free & Green):
-50-ball TFBGA (NEE)
-52-pin TQFN (ZL52)
Description
Pericom Semiconductor’s PI3WVR12612 is a multi-standard
video switch with wide voltage range capability. It supports
DisplayPort 1.2, HDMI 2.0, and emerging and proprietary standards.
PI3WVR12612 can pass high-speed signals up to 1.2 V peak-
to-peak differential with a common-mode voltage from 0 to
3.4V. The wide voltage range allows DC-coupled multi-standard
operation. Eliminating AC coupling capacitors saves board space
and improves signal integrity for dense PCB designs.
The high speed channels can also pass 0V-3.3V CMOS signals up
to 1MHz.
In addition to four high-speed lanes, PI3WVR12612 also switch-
es AUX, DDC, and HPD signals.
Application
Routing of DisplayPort and HDMI signals with low signal at-
tenuation between source and sink.
Block Diagram
D0+
D0-
D1+
D1-
D2+
D2-
D3+
D3-
D0+A
D0-A
D1+A
D1-A
D2+A
D0-A
D3+A
D3-A
D0+B
D0-B
D1+B
D1-B
D2+B
D2-B
D3+B
D3-B
AUX+
SCL
AUX-
SDA
HPD
AUX+A
AUX+B
SCL_A
SCL_B
AUX-A
AUX-B
SDA_A
SDA_B
HPDA
HPDB
All trademarks are property of their respective owners.
DDC_AUX_SEL
GPU_SEL
OE
15-0175
Logic
Control
1
www.pericom.com 12/03/15