PI3USB10LP-A Datasheet, PDF (5/8 Pages) Pericom Semiconductor Corporation – USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications

Switching Waveforms
PI3USB10LP-A
USB 2.0 High-Speed (480 Mbps) Signal Switch
Targeted for Battery Powered Applications
Input
2.5V
tPLH
Output
2.5V
2.5V
3.5V
1.5V
t_PHL
2.5V
VOH
VOL
Voltage Waveforms Propagation Delay Times
SEL
tPZL
Waveform 1
tPZH
Waveform 2
1.25V
1.25V
tPLZ
VDD/2
tPHZ
VDD/2
VOL +0.3V
VOH –0.3V
2.5V
0V
VOH
VOL
VOH
VOL
Voltage Waveforms Enable and Disable Times
Applications Information
Logic Inputs
The logic control inputs can be driven up to +3.6V regardless of the supply voltage. For example, given a +3.3V supply, the output
enables or select pins may be driven low to 0V and high to 3.6V. Driving IN Rail-to-Rail® minimizes power consumption.
Power Supply Sequencing
Proper power supplysequencing is recommended for all CMOS devices. Always apply VCC and GND before applying signals to
input/output or control pins.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
07-0096
5
PS8858G
05/02/07