PI3USB14 Datasheet, PDF (4/9 Pages) Pericom Semiconductor Corporation – Low Voltage, High Bandwidth, USB 2.0, 4:1 Mux/DeMux with Single Enable

PI3USB14
Low Voltage, High Bandwidth, USB 2.0,
4:1 Mux/DeMux with Single Enable
Dynamic Electrical Characteristics Over the Operating Range (T_A = -40º to +85º, V_CC = 3.3V ± 10%)
Parameter
Description
Test Condition
Min.
Typ.
Max.
X_TALK
Crosstalk
See Test Diagram
-60
O_IRR
Off-Isolation
See Test Diagram
-60
BW
-3dB Bandwidth
See Test Diagram
200
300
Units
dB
MHz
Switching Characteristics over 3.3V Operating Range
Parameters
Description
Conditions⁽¹⁾
t_PLH
t_PHL
Propogation Delay^(2,3) Y to In, In to Y
t_PZH
t_PZL
Enable Time S or EN to Y or In
t_PHZ
t_PLZ
Disable Time S or EN to Y or In
See Test Diagram
See Test Diagram
Min.
Com.
Typ.
Max.
0.3
Units
1.5
9.0
ns
1.5
9.0
Switching Characteristics over 2.5V Operating Range
Parameters
Description
t_PLH
t_PHL
Propogation Delay^(2,3) Y to In, In to Y
t_PZH
t_PZL
Enable Time S or EN to Y or In
t_PHZ
t_PLZ
Disable Time S or EN to Y or In
Conditions⁽¹⁾
See Test Diagram
See Test Diagram
Com.
Min. Max.
0.3
Units
1.5
15.0
ns
1.5
12.0
Notes:
1. See test circuit and waveforms.
2. This parameter is guaranteed but not tested on Propagation Delays.
3. The switch contributes no propagational delay other than the RC delay of the ON resistance of the switch and the load capacitance. The time
constant for the switch alone is of the order of 0.30ns for 10pF load. Since this time constant is much smaller than the rise/fall times of typical
driving signals, it adds very little propagational delay to the system. Propagational delay of the switch when used in a system is determined by
the driving circuit on the driving side of the switch and its interaction with the load on the driven side.
4
PS8760
02/01/05