PI3USB14 Datasheet, PDF (3/9 Pages) Pericom Semiconductor Corporation – Low Voltage, High Bandwidth, USB 2.0, 4:1 Mux/DeMux with Single Enable

PI3USB14
Low Voltage, High Bandwidth, USB 2.0,
4:1 Mux/DeMux with Single Enable
Capacitance (T_A = 25°C f = 1 MHz)
Parameters⁽⁵⁾
Description
Test Conditions
Typ.
C_IN
Input Capacitance
3.0
C_OFF(IN)
C_OFF(Y)
In Capacitance, Switch Off
Y Capacitance, Switch Off
3.5
V_IN = 0V
12
C_ON
Y/In Capacitance, Switch On
15.0
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at V_CC = 3.3V, T_A = 25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Measured by the voltage drop between Y and In pin at indicated current through the switch. On-Resistance is determined
by the lower of the voltages on the two (Y, In) pins.
5. This parameter is determined by device characterization but is not production tested.
Units
pF
Power Supply Characteristics
Parameters
Description
Test Conditions⁽¹⁾
Min. Typ.⁽²⁾ Max. Units
I_CC
Quiescent Power Supply Current
V_CC = 3.6V, V_IN = GND or V_CC
0.8 mA
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at V_CC = 3.3V, +25°C ambient.
3. Per LVTTL driven input (control inputs only); Y and In pins do not contribute to I_CC. This parameter is guaranteed, but not production tested.
3
PS8760
02/01/05