PI3V713-A Datasheet, PDF (3/8 Pages) Pericom Semiconductor Corporation – 3.3V, 7-Channel Analog Video Switch

PI3V713-A
3.3V, 7-Channel Analog Video Switch
Maximum Ratings
(Above which useful life may be impaired.For user guidelines,
not tested.)
Storage Temperature....................................–65°C to +150°C
Supply Voltage to Ground Potential...............–0.5V to +4.0V
DC Input Voltage............................................–0.5V to +5.5V
DC Output Current......................................................120mA
Power Dissipation...........................................................0.5W
Note:
Stresses greater than those listed under MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any other conditions above
those indicated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions for extended
periods may affect reliability.
Truth Table
SEL
0
1
Result
Port 1 is active
Port 2 is active
DC Electrical Characteristics for Video Switching over Operating Range
(T_A = –40°C to +85°C, V_DD = 3.3V ±10% , 5V V_DD = 5V)
Parameters
Description
Test Conditions⁽¹⁾
Input HIGH Voltage (SEL/Priority
V_IH
and MS pins)
Guaranteed HIGH level
Input LOW Voltage (SEL/Priority,
V_IL
and MS pins)
Guaranteed LOW level
V_IK
Clamp Diode Voltage
V_DD = Max., I_SELx = –18mA
I_IH
Input HIGH Current (SEL/Priority) V_DD = Max., V_SELx = V_DD
I_IL
Input LOW Current (SEL/Priority) V_DD = Max., V_SELx = GND
I_{OFF_H/V/DDC}
R_ON
Power Down Leakage Current for
H/V and DDC channels only
Switch On-Resistance for RGB
path ⁽³⁾
V_DD = 0V, VB = 0V, VA ≤ 3.6
V_DD = Min., 0V ≤ V_input ≤ 1.2V,
I_input = –40mA
R_FLAT(ON)
On-Resistance Flatness for RGB
path ⁽⁴⁾
V_DD = Min., V_input @ 0V and 1.2V,
I_input = –40mA
∆R_ON
On-Resistance match from center
ports to any other port (RGB path
only)(4)
V_DD = Min., 0V ≤ V_input ≤ 1.2V,
I_input = –40mA
Min.
2
–0.5
-
-
-
-
-
-
-
V_{OH (H/V)}
Output high for H/V signals
5V V_DD = 5V, I_OH = -24mA
3.0
V_{OL (H/V)}
Output low for H/V signals
5V V_DD = 5V, I_OL = 24mA
0
Typ.⁽²⁾ Max. Units
-
-
-
0.8
V
–0.8 –1.2
-
±5
-
±5
µA
-
±5
4.8
5.6
0.5
+1
Ω
0.1
1
5V
V_{DD V}
0.8
10-0192
3
PS9101
06/29/10