English
Language : 

PI3V713-A Datasheet, PDF (1/8 Pages) Pericom Semiconductor Corporation – 3.3V, 7-Channel Analog Video Switch
PI3V713-A
3.3V, 7-Channel Analog Video Switch
Features
• Designed specifically to switch VGA signals
• 7-Channels for VGA signals (R,G,B, Hsync, Vsync, DDC
Data, and DDC CLK)
• VDD = 3.3V +/-10%
• DDC path will operate as a 5V to 3.3V level shifter
• H/V output buffer with +/-24mA drive
• ESD tolerance on video I/O pins is up to 12kV HBM per
JEDEC standard
• -3dB BW of 1.7GHz (typ)
• Low Xtalk, (-38dB typ)
• Low and Flat ON-STATE resistance (Ron = 4.8-Ohm,
Ron(Flat) = 0.5ohm, typ)
• Low input/output capacitance (Con = 5.6pF, typ)
• Packaging (Pb-free and Green):
–32-contact TQFN (ZLE)
Applications
• Routes physical layer signals for high bandwidth digital video
Description
Pericom’s PI3V713-A is a 7-channel video mux/demux used
to switch between multiple VGA sources or end points. In a
notebook application where analog video signals are found in both
the notebook and the dock, a switch solution is required to switch
between the two video port locations. With the high bandwidth
of~1.7GHz, the signal integrity will remain strong even through
the long FR4 trace between the notebook and the docking station.
In addition to high signal performance, the video signals are also
protected against high ESD with integrated diodes to VDD and
GND that will support up to12kV HBM ESD protection.
Application
Routing VGA signals with low signal attenuation and high ESD.
Block Diagram
R
G
B
H_SOURCE
V_SOURCE
SEL
SDA_SOURCE
SCL_SOURCE
10-0192
+5V
Dual
Buffer
R1
G1
B1
R2
G2
B2
H1_OUT
V1_OUT
Control
Logic
5V to 3.3V
Level Shifter
Dual
Buffer
H2_OUT
V2_OUT
SDA1
SCL1
SDA2
SCL2
Pin Diagram
R
G
GND
VDD
B
H_SOURCE
V_SOURCE
Reserved
SDA_SOURCE
SCL_SOURCE
GND
32 31 30 29 28
1
27
2
26
3
25
4
24
5
23
6 GND 22
7
21
8
20
9
19
10
18
11
17
12 13 14 15 16
R1
R2
G1
G2
VDD
B1
B2
H1_OUT
H2_OUT
V1_OUT
V2_OUT
1
PS9101
06/29/10