English
Language : 

PT7C4363 Datasheet, PDF (16/22 Pages) Pericom Semiconductor Corporation – Real-time Clock Module (I2C Bus)
Data Sheet
PT7C4363
Real-time Clock Module (I2C Bus)
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
a) Write via I2C bus
S
Slave address (7 bits)
write A
10 1 0 00 1 0
Addr. setting
Start
Slave address + write specification
A
C Address
K Specifies the write start address.
A bit bit bit bit bit bit bit bit A P
76543210
A
C Write data
K
A Stop
C
K
b) Read via I2C bus
• Standard read
S
Slave address (7 bits)
write A
10100010
Addr. setting
A
Start
A
A
Slave address + write specification
C Address
C
K Specifies the read start address.
K
Sr
Slave address (7 bits)
Read A
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
A
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
/
A
P
10 1 0 00 1 1
Restart
Slave address + read specification
A
C
Data read (1)
K Data is read from the specified start
address and address auto increment.
A
C
Data read (2)
K Address auto increment to set the
address for the next data to be read.
N Stop
O
A
C
K
• Simplified read
S
Slave address (7 bits)
Read A
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
A
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
/
A
P
10 1 0 00 1 1
Start Slave address + read specification
A
C
Data read (1)
K Data is read from the address pointed
by the internal address register and
address auto increment.
A
C
Data read (2)
K Address register auto increment to set
the address for the next data to be
read.
N Stop
O
A
C
K
Note:
1. The above steps are an example of transfers of one or two bytes only. There is no limit to the number of bytes transferred
during actual communications.
2. 49H, 4AH are used as test mode address. Customer should not use the addresses.
PT0207(07/05)
16
Ver: 0