PE3236 Datasheet, PDF (5/15 Pages) Peregrine Semiconductor Corp. – 2200 MHz UltraCMOS-TM Integer-N PLL for Low Phase Noise Applications

PE3236
Product Specification
Table 2. Absolute Maximum Ratings
Symbol Parameter/Conditions Min Max Units
VDD
Supply voltage
VI
Voltage on any input
II
DC into any input
-0.3 4.0
V
-0.3
VDD +
0.3
V
-10 +10 mA
IO
DC into any output
-10 +10 mA
Tstg
Storage temperature range -65 150 °C
Table 3. Operating Ratings
Symbol Parameter/Conditions Min Max Units
VDD
Supply voltage
2.85 3.15
V
TA
Operating ambient
temperature range
-40 85
°C
Table 4. ESD Ratings
Symbol
Parameter/Conditions
Level Units
VESD
ESD voltage (Human Body
Model)
1000
V
Note 1: Periodically sampled, not 100% tested. Tested per MIL-
STD-883, M3015 C2
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS™ device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the specified rating in Table 4.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
Table 5. DC Characteristics: V_DD = 3.0 V, -40° C < T_A < 85° C, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
IDD
Operational supply current;
Prescaler enabled
Digital Inputs: All except fr, R0, Fin, F_in
VDD = 2.85 to 3.15 V
22
VIH
High level input voltage
VDD = 2.85 to 3.15 V
0.7 x VDD
VIL
Low level input voltage
VDD = 2.85 to 3.15 V
IIH
High level input current
VIH = VDD = 3.15 V
IIL
Low level input current
VIL = 0, VDD = 3.15 V
-1
Reference Divider input: fr
IIHR
High level input current
VIH = VDD = 3.15 V
IILR
Low level input current
VIL = 0, VDD = 3.15 V
-100
R0 Input (Pull-up Resistor): R0
IIHRO
High level input current
VIH = VDD = 3.15 V
IILRO
Low level input current
VIL = 0, VDD = 3.15 V
-5
Counter and phase detector outputs: fc, fp
VOLD
Output voltage LOW
Iout = 6 mA
VOHD
Output voltage HIGH
Iout = -3 mA
VDD - 0.4
Lock detect outputs: Cext, LD
VOLC
Output voltage LOW, Cext
Iout = 0.1 mA
VOHC
VOLLD
Output voltage HIGH, Cext
Output voltage LOW, LD
Iout = -0.1 mA
Iout = 1 mA
VDD - 0.4
Max
35
Units
mA
V
0.3 x VDD
V
+1
µA
µA
+100
µA
µA
+5
µA
µA
0.4
V
V
0.4
V
V
0.4
V
Document No. 70-0026-03 │ www.psemi.com
©2003-2005 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 15