|
MN662785TBUC Datasheet, PDF (47/89 Pages) Panasonic Semiconductor – LSI FOR COMPACT DISC/CD ROM PLAYER | |||
|
◁ |
MN662785TBUC
(B) Digital audio interface control
Data (D15 to D0)
Command
(HEX)
(B7 to B0)
42
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
Table 7-1-5 (2)
Symbol Function (ËÉ¿ Setting at reset)
UBITC
Bit U control
ɹËLDON control (Inverted LDON)
ɹɹOutput enabled
ɹɹOutput fixed at high level
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
COPYI Generation status bit setting
É¹Ë 0 setting
ɹɹ 1 setting
TXVSEL
Bit V control 1
ËHigh level while the signal is attenuated
ɹ Signal attenuation ignored
Note 1) Soft muting is included.
Note 2) Both levels will be high with the
gain set to ʵʿ dB.
TMUTE
Output data muting
ɹËDisabled
ɹɹEnabled
Note 1) Only audio data is fixed at 0.
Note 2) The bit V level is high.
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
IPDISEN Bit V control 2
ɹËHigh level when the level of IPFLAG
is high
ɹɹIPFLAG ignored
TXDSEL
Output speed selection
ɹËNormal speed
ɹɹ2x speed
Note 1) Available only if the anti-shock
memory controller is turned off in
2x-speed playback mode.
Note 2) Audio signal will be output at 2x-
speed as well.
VFREE
Bit V control 3
ɹËThe level will be high while the signal
is attenuated (including the gain setting
to ʵʿdB) in DMUTE condition.
Signal attenuation (including the gain
setting to ʵʿ dB) with DMUTE
condition ignored.
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
XSEL
Output control
ËEnabled
ɹ Fixed at low level
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
CATC Category code settingɹ
ɹËCD mode
ɹɹGeneral mode
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ ÌÌÌÌ
CFS1,
CFS2
Clock precision setting
ɹËStandard mode
ɹɹVariable pitch mode
ɹɹHigh precision mode
ɹɹNot defined
SDD00026AEM
47
|
▷ |