MN66710 Datasheet, PDF (4/19 Pages) Panasonic Semiconductor – Full-Function DAB Receiver LSI

MN66710
I Pin Descriptions
Pin No. Pin Name
1 MPUSYNC
2 NPADRDY
3
MPUCLK
4
MPURX
5
MPUTX
6
MPUMOD
7
TEST0
8
TEST1
9
TEST2
10
TEST3
11
NRST
12
VSS0
13
VDD0
14
MCLK24
15
MCLKO
16
DAOUT
17
AUXDAT
18
SMCK
19
SLRCK
20
SCLK
21
SDAT
22
RDIU0
23
RDIU1
24
RDIU2
25
RDIIN
26
RDIU3
27
RDIU4
28
RDIU5
29
RDIOUT
30
VSS1
31
VDD1
32
FD3EN
33
FW4
34
FW3
35
FW2
I/O
Descriptions
Note
O Microcontroller operation reference signal Timing signal with a 24 ms period
O PAD data ready signal
Indicates that the PAD register can be read
I Microcontroller interface data clock
I Microcontroller interface reception data
O Microcontroller interface transmission data
I Microcontroller interface mode
I Test mode setup
I Test mode setup
I Test mode setup
I Test mode setup
I Master reset input
Normally connect to V_SS
Normally connect to V_SS
Normally connect to V_SS
Normally connect to V_SS
The IC is reset when this input is set low
 Digital system ground
 Digital system power supply
I Master clock input (24.576 MHz)
O Master clock oscillator circuit output For use with a crystal oscillator element
O SPDIF digital audio interface output
I Audio A/D converter serial data input Auxiliary input A/D converter connection
O Audio A/D and D/A converter master clock Outputs a 256 fs clock
O Audio A/D and D/A converter left/right clock
O Audio A/D and D/A converter serial clock output
O Audio D/A converter serial data output Audio output D/A converter connection
O Auxiliary outputs for RDI expansion Normally left open
O Auxiliary outputs for RDI expansion Normally left open
O Auxiliary outputs for RDI expansion Normally left open
I RDI input
RDI back channel (audio only)
O Auxiliary outputs for RDI expansion Normally left open
O Auxiliary outputs for RDI expansion Normally left open
I Auxiliary inputs for RDI expansion Normally connect to V_SS
O RDI output
For high capacity mode only
 Digital system ground
 Digital system power supply
I General-purpose data output enable Output enable for FDAT3, FERF3, and FCLK3
O General-purpose output window 4
Window for sub-channel 4
O General-purpose output window 3
Window for sub-channel 3
O General-purpose output window 2
Window for sub-channel 2
4
SDC00041BEM