EXB-V8V-750JV Datasheet, PDF (3/11 Pages) Panasonic Semiconductor – PRODUCT SPECIFICATION FOR APPROVAL

Subject
Chip Resistor Array PRODUCT SPECIFICATION FOR INFORMATION
Part No.
EXBV8V
Spec. No.
151-EXB-V8V01NE
9-2
Item
Maximum
overload voltage
Resistance
tolerance
Range of rated
resistance for
manufacture
Rated Value
Explanation
Voltage should be 2.5 × E. When the voltage exceeds the maximum
overload voltage, the value shown below should be the maximum
overload voltage.
Maximum overload voltage: 100V
Chip jumper: Max. overload current 2A
Sign
J
0
Tolerance for resistance
±5%
Chip Jumper
Tolerance Resistance range
J
1.0 Ω to 1.0 MΩ
0
Less than 50 mΩ
Series
E-24
-
4. Explanation of part number
EXBV8V1 0 2 JV
Thick Film
Resistor Networks
Chip
Resistor
Array
Isolated
Circuit
Number of terminals
Rated Resistance Tolerance
Packaging
Part No.
V8V
8
7
6
5
R0 0 0
Chip Jumper
Circuit
1
2
3
4
Packaging
Taping
(5,000pcs/reel)
Code
V
5. Appearance & Construction
Item
Appearance &
Construction
Specifications
Explanation
1. The resistive element should be covered with protective coating
that do not fade easily. The surface of coating should avoid
unevenness, flaw, pinhole and discoloration.
2. The electrode should be printed uniformly, as shown in the
dimensions. The plating should not fade easily, and should avoid
unevenness, flaw, pinhole, projection and discoloration.
3. The electrode should be connected electrically, mechanically to
resistive element.
4. Substrate should not have chipping, flaw, flash and crack. Details
of appearance criteria shall be as described in attached sheet
Panasonic Electronic Devices Co.,Ltd.