HC2-HP-DC12V Datasheet, PDF (14/15 Pages) Panasonic Semiconductor – Relay for control panel of 1A to 10A (1c/2c/3c/4c)

3) TM type
4 Form C
CAD Data
External dimensions
20.6
43
.811
1.693
34.2
1.346
1
.039
6.4
.252
2.54 0.5
13.35 ^{.100 .020}
.526
4.45
3.6
.142
.175
4.31
.170
12
56
34
78
9 10 11 12
13
14
4.06
.160 37.6
6.35 27 1.480
.250 _1.063
6.35
.250
2
.079
HC
The diagrams show the external dimensions of
the 4 Form C and 4-pole bifurcated (twin) types.
For 1 Form C, 2 Form C, and 3 Form C, see
diagrams at plug-in types (only the terminals are
different).
General tolerance: ±0.3 ±.012
Chassis (Panel) cutout
2-3.6 dia.
2-.142 dia.
37.6
1.480
Tolerance: ±0.1 ±.004
Schematic
Same schematic as plug-in type HC relay
Be aware that there is no LED indicator with
built-in diode types.
Chassis (Panel) cutout in tandem mounting
23
.906
37.6
1.480
21
21
.827 .827
2
.079
Notes: 1. In mounting, use M3 screws and M3 washers.
2. When mounting TM types, use washers to prevent damage or distortion to the polycarbonate cover.
3. When tightening fixing screws, the optimum torque range should be 0.294 to 0.49 N·m, (3 to 5 kgf·cm).
Moreover, use washers to prevent loosening.
With diode type (For DC)
Same dimensions as HC relay standard/plug-in type
CAD Data
Schematic
Without LED indicator
1234
5678
9 10 11 12
13−
+14
Protection (surge-absorbing) diode
With LED indicator
1234
5678
9 10 11 12
13−
+14
LED
Protection (surge-absorbing) diode
ASCTB4E 201302-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/