MN103SFM8K Datasheet, PDF (13/25 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

Name
SBI0
SBI1
SBI2
TQFP 48
Pin No.
49
46
43
I/O
Input
Other Function
P27
P24
P21
SBT0
48
SBT1
45
SBT2
42
I/O
P26
P23
P20
TM1IO
50
TM2IO
51
TM3IO
52
TM4IO
53
TM5IO
55
TM7IO
63
TM17IO
40
I/O
P31
P32
P33
P34
P35
P51
P16
TM8AIO 57
TM8BIO 58
TM9AIO 59
TM9BIO 60
TM10AIO 61
TM10BIO 62
TM11IO0 77
TM11IO1 79
I/O
P36
P37
P42
P43
P46
P47
P72
P73
TM11IO0 77
TM11IO1 79
Output P72
P73
ADIN00
6
ADIN01
7
ADIN02
8
ADIN03
9
ADIN04
11
ADIN05
13
ADIN06
14
ADIN07
15
ADIN08
16
ADIN09
17
ADIN10
18
ADIN11
19
ADIN12
20
ADIN13
21
ADIN14
22
ADIN15
23
Input P90
P91
P92
P93
P94
P95
P96
P97
PA0
PA1
PA2
PA3
PA4
PA5
PA6
PA7
MN103SFM8K
32-bit Single-chip Microcontroller
PubNo. 232M8-011E
Function
Description
Serial interface
reception data
input pin
Reception data input pins for serial interface
0, 1, and 2.
Pull-up resistor can be selected by the
P2PLU register. Select input by the P2DIR
register.
These can be used as normal I/O pins when
serial interfaces are not used.
Serial interface
clock I/O pin
Clock I/O pins for serial interface 0, 1, and 2.
Pull-up resistor can be selected by the
P2PLU register. Select either input or output
by the P2DIR register and serial pin function
by the P2MD register.
These can be used as normal I/O pins when
serial interfaces are not used.
Timer I/O pin
Event counter input and timer pulse output
pins for 8-bit timer 1 to 5, 7 and 17.
At event count input, input mode dan be
selected by the P1, 3 and 5DIR registers. At
input mode, pull-up resistor can be selected
by the P1, 3 and 5PLU registers.
At timer pulse output, selected timer output
pins by the P1,3 and 5MD registers and set
output mode by the P1,3 and 5DIR registers.
These can be used as normal I/O pins when
these are not used as timer I/O pins.
Timer I/O pin
Event counter input, timer output, and PWM
output pins for 16-bit timer 8 to 11.
At event counte input, input mode can be
selected by the P3, 4, and 7DIR registers. At
input mode, pull-up resistor can be selected
by the P3, 4, and 7PLU register.
At timer output and PWM output, select timer
output pins by the P3, 4, and 7MD registers,
and set output mode by the P3, 4, and 7DIR
register.
These can be used as normal I/O pins when
these are not used as timer I/O pins.
PWM output pin
Motor control PWM signal output pins for 16-
bit timer 11. These output PWM signals for
16-bit timer 11 to 2 pins simultaneously.
At PWM output, select timer output pin by
the P7MD register and set to output mode by
the P7DIR register.
These can be used as normal I/O pins when
these are not used as timer I/O pins.
Analogue input pin Analogue input pins for 16-channel, 10-bit 3
A/D converters.
These can be used as normal I/O pins when
these are not used as analog input.
Publication date: August 2014