MN103SFM8K Datasheet, PDF (12/25 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

Name
P42
P43
P46
P47
TQFP 48
Pin No.
I/O
59
I/O
60
61
62
Other Function
TM9AIO
TM9BIO
TM10AIO
TM10BIO
P51
63
I/O
TM7IO
P52
64
PWM00
P53
65
NPWM00
P54
66
PWM01
P55
67
NPWM01
P56
68
PWM02
P57
69
NPWM02
P62
70
I/O
PWM10
P63
71
NPWM10
P64
72
PWM11
P65
73
NPWM11
P66
74
PWM12
P67
75
NPWM12
P72
77
I/O
TM11IO0
P73
79
TM11IO1
P80
1
P81
2
P82
3
P83
4
I/O
IRQ00
IRQ01
IRQ02
IRQ03
P90
6
P91
7
P92
8
P93
9
P94
11
P95
13
P96
14
P97
15
PA0
16
PA1
17
PA2
18
PA3
19
PA4
20
PA5
21
PA6
22
PA7
23
SB00
47
SB01
44
SB02
41
I/O
I/O
Output
ADIN00
ADIN01
ADIN02
ADIN03
ADIN04
ADIN05
ADIN06
ADIN07
ADIN08
ADIN09
ADIN10
ADIN11
ADIN12
ADIN13
ADIN14
ADIN15
P25
P22
P17
MN103SFM8K
32-bit Single-chip Microcontroller
PubNo. 232M8-011E
Function
I/O port 4
I/O port 5
I/O port 6
I/O port 7
I/O port 8
I/O port 9
Description
4-bit CMOS I/O port.
Each bit can be set individually as either
input or output by the P4DIR register.
Pull-up resistor for each bit can be selected
individually by the P4PLU register.
At reset, the input mode (P42, P43, P46,
P47) is selected and pull-up resistor is dis-
abled.
7-bit CMOS I/O ports.
Each bit can be set individually as either
input or output by the P5DIR register.
Pull-up resistor for each bit can be selected
individually by the P5PLU register.
At reset, the input mode (P51 to P57) is
selected, and pull-up resistor is disabled.
6-bit CMOS I/O ports.
Each bit can be set individually as either
input or output by the P6DIR register.
Pull-up resistor for each bit can be selected
individually by the P6PLU register.
At reset, the input mode (P62 to P67) is
selected, and pull-up resistor is disabled.
2-bit CMOS I/O ports.
Each bit can be set individually as either
input or output by the P7DIR register.
P pull-up resistor for each bit can be selected
individually by the P7PLU register.
At reset, the input mode (P72, P73) is
selected, and pull-up resistor is disabled.
4-bit CMOS input ports.
Each bit can be set individually as either
input or output by the P8PLU register.
Pull-up resistor for each bit can be selected
individually by the P8PLU register.
At reset, the input mode (P80 to P83) is
selected, and pull-up resistor is disabled.
8-bit CMOS input ports.
Each bit can be set individually as either
input or output by the P9DIR register.
Pull-up resistor for each bit can be selected
individually by the P9PLU register.
At reset, the input mode (P90 to P97) is
selected, and pull-up resistor is disabled.
I/O port A
8-bit CMOS input ports.
Each bit can be set individually as either
input or output by the PADIR register.
Pull-up resistor for each bit can be selected
individually by the PAPLU register.
At reset, the input mode (PA0 to PA7) is
selected, and pull-up resistor is disabled.
Serial interface
transmission data
output pin
Transmission data output pins for serial
interface 0, 1, and 2.
Select output by the P1DIR and P2DIR regis-
ters and serial pin function by the P1MD and
P2MD registers.
These can be used as normal I/O pins when
serial interfaces are not used.
Publication date: August 2014