EYGS1431ZLAA Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Soft-PGS (Compressible Type) PGS with low thermal resistance

“Soft-PGS (Compressible Type)” PGS with low thermal resistance
“Soft-PGS (Compressible Type)” PGS
with low thermal resistance
Type: EYGS
Soft-PGS (Compressible Type) is a graphite sheet that is dedicated for
use as a thermal interface material.
The Soft-PGS (Compressible Type) has very high compressibility compared
to standard PGS, which enables reducing the thermal resistance by
following gap, warpage, and distortion of targets/substrates.
Excellent heat resistance and reliability of the Soft-PGS help obtaining
longer service life and higher performance of various components, such
as power modules.
The Soft-PGS (Compressible Type) is cost-saving, because it may
allow you to reduce your existing processes. Unlike grease, there is no
necessity for printing process , since it is a sheet-type product.
There are no problems that are found in grease and phase change
materials in the Soft-PGS, which makes it excellent TIM.
Features
● _{Thermal resistance : 0.2K∙cm}²_{/W (600 kPa)}
To draw a good thermal resistance from sheet, pressure the Soft-PGS.
A close adherence would make the product fit into the uneven part and
enhance the performance.
● _{Thermal conductivity : X-Y direction 400W/m∙K, Z direction (28W/m∙K)}
● _{Compressibility : 40 % (600k Pa)}
● _{High and long term reliability : operating temperature range –55 to 400 °C}
● _{RoHs compliant}
After pressure
Recommended applications
For cooling/heat transfer of electronic devices that generates heat,
such as power modules.
● _{Inverters and converters}
● _{Car-mounted camera, motor control unit, automotive LED,}
luminous source of laser HUD, medical equipment
● _{Base station, Server}
Install in IGBT module
IGBT module
Soft-PGS
Heatsink
Explanation of Part Numbers
● _{Soft-PGS(EYGS✽✽✽✽ZL✽✽)}
1
2
3
4
5
EYGS 0
Product Code
PGS Graphite sheet
Style
S PGS only
6
7
8
9
10
11
12
9
1
8
Z
L
X
2
Suffix
0909
0918
1818
Dimension
90 mm × 90 mm
90 mm × 180 mm
180 mm × 180 mm
Thickness of Soft-PGS
ZL
200 μm
✽ Please contact us for custom-made products.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2017