CAT28C256N-20 Datasheet, PDF (8/14 Pages) ON Semiconductor – 256 kb Parallel EEPROM

CAT28C256
DATA Polling
DATA polling is provided to indicate the completion of
write cycle. Once a byte write or page write cycle is initiated,
attempting to read the last byte written will output the
complement of that data on I/O₇ (I/O₀–I/O₆ are
indeterminate) until the programming cycle is complete.
Upon completion of the self−timed write cycle, all I/O’s will
output true data during a read cycle.
Toggle Bit
In addition to the DATA Polling feature of the
CAT28C256, the device offers an additional method for
determining the completion of a write cycle. While a write
cycle is in progress, reading data from the device will result
in I/O₆ toggling between one and zero. However, once the
write is complete, I/O₆ stops toggling and valid data can be
read from the device.
ADDRESS
CE
WE
OE
I/O7
WE
D_IN = X
t_OEH
t_OE
t_WC
D_OUT = X
Figure 8. DATA Polling
t_OES
D_OUT = X
CE
t_OEH
t_OE
OE
I/O₆
(Note 14)
t_WC
Figure 9. Toggle Bit
14. Beginning and ending state of I/O₆ is indeterminate.
t_OES
(Note 14)
http://onsemi.com
8