MC74HC4316A_14 Datasheet, PDF (5/10 Pages) ON Semiconductor – Quad Analog Switch/ Multiplexer/Demultiplexer

MC74HC4316A
ADDITIONAL APPLICATION CHARACTERISTICS (GND = 0 V)
Symbol
Parameter
V_CC
Test Conditions
V
BW Maximum On–Channel Bandwidth f_in = 1 MHz Sine Wave
2.25
or
Adjust f_in Voltage to Obtain 0 dBm at V_OS
4.50
Minimum Frequency Response
Increase f_in Frequency Until dB Meter
6.00
(Figure 5)
Reads –3 dB
R_L = 50 W, C_L = 10 pF
−
Off–Channel Feedthrough
Isolation
(Figure 6)
f_in  Sine Wave
Adjust f_in Voltage to Obtain 0 dBm at V_IS
f_in = 10 kHz, R_L = 600 W, C_L = 50 pF
2.25
4.50
6.00
f_in = 1.0 MHz, R_L = 50 W, C_L = 10 pF 2.25
4.50
6.00
−
Feedthrough Noise, Control to
Switch
(Figure 7)
V_in v 1 MHz Square Wave (t_r = t_f = 6 ns)
2.25
Adjust R_L at Setup so that I_S = 0 A
4.50
R_L = 600 W, C_L = 50 pF 6.00
R_L = 10 kW, C_L = 10 pF 2.25
4.50
6.00
−
Crosstalk Between Any Two
Switches
(Figure 12)
f_in  Sine Wave
Adjust f_in Voltage to Obtain 0 dBm at V_IS
f_in = 10 kHz, R_L = 600 W, C_L = 50 pF
f_in = 1.0 MHz, R_L = 50 W, C_L = 10 pF
2.25
4.50
6.00
2.25
4.50
6.00
THD Total Harmonic Distortion
(Figure 14)
f_in = 1 kHz, R_L = 10 kW, C_L = 50 pF
THD = THD_Measured − THD_Source
V_IS = 4.0 V_PP sine wave
V_IS = 8.0 V_PP sine wave
V_IS = 11.0 V_PP sine wave
*Limits not tested. Determined by design and verified by qualification.
2.25
4.50
6.00
V_EE
V
–2.25
–4.50
–6.00
–2.25
–4.50
–6.00
–2.25
–4.50
–6.00
–2.25
–4.50
–6.00
–2.25
–4.50
–6.00
–2.25
–4.50
–6.00
–2.25
–4.50
–6.00
–2.25
–4.50
–6.00
Limit*
25°C
150
160
160
Unit
MHz
–50
dB
–50
–50
–40
–40
–40
30
mV_PP
65
100
60
130
200
–70
dB
–70
–70
–80
–80
–80
%
0.10
0.06
0.04
http://onsemi.com
5