AP0202AT Datasheet, PDF (43/54 Pages) ON Semiconductor – High-Dynamic Range Image Signal Processor

Advance
AP0202AT: Image Signal Processor (ISP)
Supported SPI Devices
Supported SPI Devices
The supported devices are those that conform to the JEDEC-compliant programming
interface. Please contact ON Semiconductor for specific design criteria and require-
ments. The maximum supported device size is 2 Gb.
Host Command Interface
The AP0202AT has a mechanism to write higher level commands, the Host Command
Interface (HCI). Once a command has been written through the HCI, it will be executed
by on chip firmware and the results are reported back. EEPROM or Flash memory is also
available to store commands for later execution.
Full details of the Host Command Interface can be found in the AP0202AT Host
Command Interface (HCI) Specification document.
AP0202AT/D Rev. 4, Pub. 9/15 EN
43
©Semiconductor Components Industries, LLC, 2015.