English
Language : 

AP0202AT Datasheet, PDF (1/54 Pages) ON Semiconductor – High-Dynamic Range Image Signal Processor
‡Advance
AP0202AT: Image Signal Processor (ISP)
Features
AP0202AT High-Dynamic Range (HDR) Image
Signal Processor (ISP)
AP0202AT Datasheet, Rev. 4
For the latest product datasheet, please visit www.onsemi.com
Features
• Up to 2.0 Mp (1920x1080) ON Semiconductor sensor
support
• 30 fps at 1080p, 45 fps at 1.2Mp, 60 fps at 720p
(Optimized for operation with HDR sensors)
• Color and gamma correction
• Auto exposure, auto white balance, 50/60 Hz auto
flicker detection and avoidance
• Adaptive Local Tone Mapping (ALTM)
• Two-wire serial programming interface (CCIS)
• Parallel output
• Configurable through low-cost SPI Flash and
EEPROM devices
• High-level host command interface
• Standalone operation supported
• Up to 7 GPIO
• Fail-safe IO
• Multi-Camera synchronization support
Applications
• Surround, rear and front view cameras
• Blind spot / side mirror replacement cameras
• Automotive viewing/processing fusion cameras
Table 1:
Key Performance Parameters
Parameter
Image sensor
interfaces
Input Data
FOrmat
Value
Parallel and HiSPi
Parallel: 12 bit SDR (linear) or
12 bit HDR companded.
Output interface
Output format
Maximum
resolution
Input clock range
Output pixel clock
maximum
Supply voltage
Operating temp.
(Ambient)
Power
consumption
HiSPI: 12 bit SDR (linear) or
12/14 bit HDR companded
Up to 24-bit parallel1
RGB888, RGB565, YUV422 8-/10-bit1
1920 x 1080 (2.0 Mp)
10 - 29 MHz
125 MHz2
VDDIO_S
1.8 or 2.8 V nominal
VDDIO_H
1.8 or 2.8 or 3.3 V
nominal
VDD_REG
1.8 V nominal
VDD
1.2 V nominal
VDD_PLL
1.2 V nominal
VDD_PHY
2.8 V nominal
VDDIO_OTPM 2.5 to 3.3 V nominal
–40°C to +105°C
250 mW
Notes: 1. Maximum frame rates depend on output interface and
data format configuration used.
2. Maximum pixel clock rates depend on IO voltage.
AP0202AT/D Rev. 4, 9/15 EN
1
©Semiconductor Components Industries, LLC 2015,
‡This document contains information on a new product. Specifications and information herein are subject to change without notice.