CM1213A_16 Datasheet, PDF (4/12 Pages) ON Semiconductor – 1, 2 and 4-Channel Low Capacitance ESD Protection Array

CM1213A, SZCM1213A
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
Operating Supply Voltage (V_P − V_N)
Operating Temperature Range
6.0
V
–40 to +85
°C
Storage Temperature Range
–65 to +150
°C
DC Voltage at any channel input
(V_N − 0.5) to (V_P + 0.5)
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
Table 3. STANDARD OPERATING CONDITIONS
Parameter
Rating
Units
Operating Temperature Range
–40 to +85
°C
Package Power Rating
SOT23−3, SOT143−4, SC−74, and SC70−6 Packages
MSOP−10 Package
mW
225
400
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note1)
Symbol
Parameter
Conditions
Min Typ Max Units
V_P
Operating Supply Voltage (V_P−V_N)
I_P
Operating Supply Current
V_F
Diode Forward Voltage
Top Diode
Bottom Diode
(V_P−V_N) = 3.3 V
I_F = 8 mA; T_A = 25°C
3.3 5.5
V
8.0 mA
V
0.60 0.80 0.95
0.60 0.80 0.95
I_LEAK
C_IN
Channel Leakage Current
Channel Input Capacitance
T_A = 25°C; V_P = 5 V, V_N = 0 V
At 1 MHz, V_P = 3.3 V, V_N = 0 V, V_IN = 1.65 V
(Note 2)
0.1 1.0 mA
0.85 1.2 pF
DC_IN
Channel Input Capacitance Matching
At 1 MHz, V_P = 3.3 V, V_N = 0 V, V_IN = 1.65 V
0.02
pF
(Note 2)
V_ESD
V_CL
ESD Protection − Peak Discharge
Voltage at any channel input, in system
Contact discharge per
IEC 61000−4−2 standard
Channel Clamp Voltage
Positive Transients
Negative Transients
T_A = 25°C (Notes 2 and 3)
T_A = 25°C, I_PP = 1A, t_P = 8/20 mS
(Note 2)
kV
8
V
+10
–1.7
R_DYN
Dynamic Resistance
Positive Transients
Negative Transients
I_PP = 1A, t_P = 8/20 mS
Any I/O pin to Ground
(Note 2)
W
0.9
0.5
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. All parameters specified at T_A = –40°C to +85°C unless otherwise noted.
2. Standard IEC 61000−4−2 with C_Discharge = 150 pF, R_Discharge = 330 W, V_P = 3.3 V, V_N grounded.
3. These measurements performed with no external capacitor on V_P (V_P floating).
www.onsemi.com
4