MC74VHCT00A Datasheet, PDF (3/7 Pages) Motorola, Inc – Quad 2-Input NAND Gate

MC74VHCT00A
MAXIMUM RATINGS (Note 1)
Symbol
Characteristics
Value
Unit
V_CC
V_IN
V_OUT
DC Supply Voltage
DC Input Voltage
DC Output Voltage
--0.5 to +7.0
V
--0.5 to +7.0
V
V_CC = 0
--0.5 to 7.0
V
High or Low State --0.5 to V_CC + 0.5
I_IK
Input Diode Current
--20
mA
I_OK
Output Diode Current
V_OUT < GND; V_OUT > V_CC
+20
mA
I_OUT
DC Output Current, per Pin
+25
mA
I_CC
DC Supply Current, V_CC and GND
+50
mA
P_D
Power Dissipation in Still Air,
SOIC Packages (Note 2)
500
mW
TSSOP Package (Note 2)
450
T_L
Lead temperature, 1 mm from case for 10 s
260
°C
T_stg
Storage temperature
--65 to +150
°C
V_ESD
ESD Withstand Voltage
Human Body Model (Note 3)
> 2000
V
Machine Model (Note 4)
> 200
Charged Device Model (Note 5)
> 3000
I_Latch--Up Latch--Up Performance
Above V_CC and Below GND at 125°C
±300
mA
(Note 6)
This device contains
protection circuitry to guard
against damage due to high
static voltages or electric
fields. However, pre-
cautions must be taken to
avoid applications of any
voltage higher than maxi-
mum rated voltages to this
high--impedance circuit. For
proper operation, V_in and
V_out should be constrained
to the range GND ≤ (V_in or
V_out) ≤ V_CC.
Unused inputs must al-
ways be tied to an appropri-
ate logic voltage level (e.g.,
either GND or V_CC). Un-
used outputs must be left
open.
* Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or
conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute--maximum--rated conditions
is not implied.
1. Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those
indicated may adversely affect device reliability. Functional operation under absolute--maximum--rated conditions is not implied. Functional
operation should be restricted to the Recommended Operating Conditions.
2. Derating -- SOIC Packages: –7 mW/_C from 65_ to 125_C
-- TSSOP Package: --6.1 mW/_C from 65_ to 125_C
3. Tested to EIA/JESD22--A114--A
4. Tested to EIA/JESD22--A115--A
5. Tested to JESD22--C101--A
6. Tested to EIA/JESD78
RECOMMENDED OPERATING CONDITIONS
Symbol
Characteristics
Min
V_CC
V_IN
V_OUT
DC Supply Voltage
DC Input Voltage
DC Output Voltage
3.0
0.0
VCC = 0
0.0
High or Low State
0.0
T_A
Operating Temperature Range
--55
t_r , t_f
Input Rise and Fall Time
V_CC = 3.3 V ± 0.3 V
0
V_CC = 5.0 V ± 0.5 V
0
Max
5.5
5.5
5.5
V_CC
+125
100
20
Unit
V
V
V
°C
ns/V
http://onsemi.com
3