|
MC74LVX541_11 Datasheet, PDF (3/7 Pages) ON Semiconductor – Octal Bus Buffer | |||
|
◁ |
MC74LVX541
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC DC Supply Voltage
â 0.5 to + 7.0
V
Vin DC Input Voltage
â 0.5 to + 7.0
V
Vout DC Output Voltage
â 0.5 to VCC + 0.5
V
IIK Input Diode Current
â 20
mA
IOK Output Diode Current
± 20
mA
Iout DC Output Current, per Pin
± 25
mA
ICC DC Supply Current, VCC and GND Pins
± 50
mA
PD Power Dissipation in Still Air,
SOIC Packagesâ
500
mW
TSSOP Packageâ
450
Tstg Storage Temperature
â 65 to + 150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress
ratings only. Functional operation above the Recommended Operating Conditions is not implied.
Extended exposure to stresses above the Recommended Operating Conditions may affect device
reliability.
â Derating â SOIC Packages: â 7 mW/°C from 65° to 125°C
TSSOP Package: â 6.1 mW/°C from 65° to 125°C
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this highâimpedance cir-
cuit. For proper operation, Vin and
Vout should be constrained to the
range GND v (Vin or Vout) v VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
VCC DC Supply Voltage
2.0
Vin DC Input Voltage
0
Vout DC Output Voltage
0
TA Operating Temperature, All Package Types
â40
tr, tf Input Rise and Fall Time
VCC = 3.3V ±0.3V
0
Max
3.6
5.5
VCC
+ 85
100
Unit
V
V
V
°C
ns/V
DC ELECTRICAL CHARACTERISTICS
Symbol
Parameter
VIH Minimum HighâLevel Input Voltage
Test Conditions
VIL Maximum LowâLevel Input Voltage
VOH Minimum HighâLevel Output Voltage IOH = â 50 mA
Vin = VIH or VIL
IOH = â 50 mA
IOH = â 4 mA
VOL Maximum LowâLevel Output Voltage IOL = 50 mA
Vin = VIH or VIL
IOL = 50 mA
IOL = 4 mA
Iin
Maximum Input Leakage Current
Vin = 5.5 V or GND
IOZ Maximum ThreeâState Leakage
Current
Vin = VIL or VIH
Vout = VCC or GND
ICC Maximum Quiescent Supply Current Vin = VCC or GND
VCC
TA = 25°C
TA = â 40 to 85°C
V Min Typ Max Min
Max
Unit
2.0 1.50
3.0 2.0
3.6 2.4
1.50
V
2.0
2.4
2.0
0.50
0.50
V
3.0
0.80
0.80
3.6
0.80
0.80
2.0 1.9 2.0
1.9
V
3.0 2.9 3.0
2.9
3.0 2.58
2.48
2.0
0.0 0.1
3.0
0.0 0.1
3.0
0.36
0.1
V
0.1
0.44
0 to
±0.1
±1.0
mA
3.6
3.6
±0.2
±2.5
mA
5
3.6
4.0
40.0
mA
http://onsemi.com
3
|
▷ |