74HC574 Datasheet, PDF (3/8 Pages) NXP Semiconductors – Octal D-type flip-flop; positive edge-trigger; 3-state

74HC574
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
V_CC
V_I
V_O
I_IK
I_OK
I_O
I_CC
I_GND
T_STG
T_L
T_J
q_JA
P_D
MSL
DC Supply Voltage
DC Input Voltage
DC Output Voltage
DC Input Diode Current
DC Output Diode Current
DC Output Sink Current
DC Supply Current per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 Seconds
Junction Temperature under Bias
Thermal Resistance
Power Dissipation in Still Air at 85_C
Moisture Sensitivity
(Note 1)
TSSOP
TSSOP
*0.5 to )7.0
*0.5 to V_CC )0.5
*0.5 to V_CC )0.5
$20
$35
$35
$75
$75
*65 to )150
260
)150
128
450
Level 1
V
V
V
mA
mA
mA
mA
mA
_C
_C
_C
_C/W
mW
F_R
V_ESD
Flammability Rating
ESD Withstand Voltage
Oxygen Index: 30% − 35% UL 94 V−0 @ 0.125 in
Human Body Model (Note 2)
>2000
V
Machine Model (Note 3)
>200
I_Latchup Latchup Performance
Above V_CC and Below GND at 85_C (Note 4)
$300
mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. I_O absolute maximum rating must be observed.
2. Tested to EIA/JESD22−A114−A.
3. Tested to EIA/JESD22−A115−A.
4. Tested to EIA/JESD78.
5. For high frequency or heavy load considerations, see the ON Semiconductor High−Speed CMOS Data Book (DL129/D).
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
V_CC
DC Supply Voltage
(Referenced to GND)
2.0
V_I, V_O DC Input Voltage, Output Voltage
(Referenced to GND)
0
T_A
Operating Temperature, All Package Types
*55
t_r, t_f
Input Rise and Fall Time (Figure 3)
V_CC = 2.0 V
0
V_CC = 4.5 V
0
V_CC = 6.0 V
0
6. Unused inputs may not be left open. All inputs must be tied to a high− or low−logic input voltage level.
Max
Unit
6.0
V
V_CC
V
)125
_C
1000
ns
500
400
ORDERING INFORMATION
Device
Package
Shipping^†
74HC574DTR2G
TSSOP−20*
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently Pb−Free.
http://onsemi.com
3