MT9F002_16 Datasheet, PDF (22/89 Pages) ON Semiconductor – 1/2.3-Inch 14 Mp CMOS Digital Image Sensor

MT9F002: 1/2.3-Inch 14 Mp CMOS Digital Image Sensor
Two-Wire Serial Register Interface
Single READ From Random Location
This sequence (Figure 18) starts with a dummy WRITE to the 16-bit address that is to be
used for the READ. The master terminates the WRITE by generating a restart condition.
The master then sends the 8-bit read slave address/data direction byte and clocks out
one byte of register data. The master terminates the READ by generating a no-acknowl-
edge bit followed by a stop condition. Figure 18 shows how the internal register address
maintained by the MT9F002 is loaded and incremented as the sequence proceeds.
Figure 18: Single READ From Random Location
Previous Reg Address, N
Reg Address, M
M+1
S Slave Address 0 A Reg Address[15:8] A Reg Address[7:0] A Sr Slave Address 1 A
Read Data
AP
S = start condition
P = stop condition
Sr = restart condition
A = acknowledge
A = no-acknowledge
slave to master
master to slave
Single READ From Current Location
This sequence (Figure 19) performs a read using the current value of the MT9F002
internal register address. The master terminates the READ by generating a no-acknowl-
edge bit followed by a stop condition. The figure shows two independent READ
sequences.
Figure 19: Single READ From Current Location
Previous Reg Address, N
S Slave Address 1 A Read Data
AP
Reg Address, N+1
N+2
S Slave Address 1 A Read Data A P
MT9F002/D Rev. 9, 1/16 EN
22
©Semiconductor Components Industries, LLC,2016.