MT9F002_16 Datasheet, PDF (1/89 Pages) ON Semiconductor – 1/2.3-Inch 14 Mp CMOS Digital Image Sensor

MT9F002: 1/2.3-Inch 14 Mp CMOS Digital Image Sensor
Features
1/2.3-Inch 14 Mp CMOS Digital Image Sensor
MT9F002 Data Sheet, Rev. 9
For the latest data sheet, please visit: www.onsemi.com
Features
• 1.4 m pixel with ON Semiconductor A-Pix™
technology
• Simple two-wire serial interface
• Auto black level calibration
• Full HD support at 60 fps for maximum video
performance
• 20 percent extra image array area in full HD to
enable electronic image stabilization (EIS).
• Support for external mechanical shutter
• Support for external LED or xenon flash
• High frame rate preview mode with arbitrary down-
size scaling from maximum resolution
• Programmable controls: gain, horizontal and vertical
blanking, frame size/rate, exposure, left–right and
top–bottom image reversal, window size, and
panning
• Data interfaces: parallel or four-lane serial high-
speed pixel interface (HiSPi™) differential signaling
(SLVS)
• On-chip phase-locked loop (PLL) oscillator
• Bayer pattern downsize scaler
Applications
• Digital video cameras
• Digital still cameras
General Description
The ON Semiconductor MT9F002 is a 1/2.3-inch
CMOS active-pixel digital imaging sensor with an
active pixel array of 4608H x 3288V (4640H x 3320V
including border pixels). It can support 14-megapixel
(4384H x 3288V) digital still images and a 1080p plus
additional 20 percent pixels for electronic image stabi-
lization (4608H x 2592V) in digital video mode. The
MT9F002 sensor is programmable through a simple
two-wire serial interface, and has low power consump-
tion.
Table 1:
Key Performance Parameters
Parameter
Value
Optical format
1/2.3-inch (4:3)
Active pixels and imager size
Pixel size
• 4608H x 3288V: (entire array): 6.451mm (H)
x 4.603mm (V), 7.925mm diagonal
• 4384H x 3288V (4:3, still mode): 6.138mm
(H) x 4.603mm (V), 7.672mm diagonal
• 4608H x 2592V (16:9, video mode):
6.451mm (H) x 3.629mm (V), 7.402mm diagonal
1.4 m x 1.4m
Chief ray angle
0°, 11.4°, and 25°
Color filter array
RGB Bayer pattern
Shutter type
Electronic rolling shutter (ERS) with global reset
release (GRR)
Input clock frequency
2–64 MHz
Maxi-
mum
data
rate
Parallel
HiSPi (4-lane)
96 Mp/s at 96 MHz PIXCLK
700 Mbps/lane
14M resolution
(4384H x 3288V)
Programmable up to 13.7 fps for HiSPi I/F, 6.3 fps
for parallel I/F
Frame
rate
Preview VGA mode
1080p mode:
• 30 fps with binning
• 60 fps with skip2bin2
• 60 fps using HiSPi interface
2304H x 1296V (1080p +20%EIS)
• 30 fps using parallel interface
2256H x 1268V (1080p +17%EIS)
ADC resolution
12-bit, on-chip
Responsivity
0.724 V/lux-sec (550nm)
Dynamic range
65.3 dB
SNR_MAX
I/O Digital
35.5 dB
1.7–1.9 V (1.8 V nominal)
or 2.4–3.1 V (2.8 V nominal)
Digital
1.7–1.9 V (1.8 V nominal)
Supply
voltage
Analog
HiSPi PHY
HiSPi I/O (SLVS)
HiSPi I/O (HiVCM)
2.7–3.1 V (2.8 V nominal)
1.7–1.9 V (1.8 V nominal)
0.3 - 0.9 V (0.4 or 0.8 V nominal)
1.7–1.9 V (1.8 V nominal)
Power
Con-
sump-
tion
Full resolution 13.65
fps (HiSPi serial I/F, 724 mW
12-bit)
1080p60 (HiSPi serial
I/F, 10-bit)
XYbin2: 596 mW
1080p30 (HiSPi serial
I/F, 10-bit)
XYbin2: 443 mW
Package
48-pin iLCC (10 mm x 10 mm) and bare die
Operating temperature
–30°C to +70°C (at junction)
MT9F002/D Rev. 9, 1/16 EN
1
©Semiconductor Components Industries, LLC 2016,