|
LC87F0808AUQFPTLM-H Datasheet, PDF (19/25 Pages) ON Semiconductor – 8-bit 1-chip Microcontroller | |||
|
◁ |
LC87F0808A
Consumption Current Characteristics at Ta = -40°C to +85°C, VSS1 = VSS2 = 0V
Parameter
Symbol
Normal mode
consumption
current
(Note 10-1)
IDDOP(1)
Pin/
Remarks
VDD1,
VDD2
Conditions
⢠FmCF=20MHz ceramic oscillation mode
⢠System clock set to 20MHz side
⢠All internal RC oscillation stopped.
⢠1/1 frequency division ratio
Specification
VDD[V]
min
typ
max
unit
3.3 to 5.5
10
12.5
(Note 10-2)
IDDOP(2)
⢠FmCF=4MHz ceramic oscillation mode
⢠System clock set to 4MHz side
⢠All internal RC oscillation stopped.
⢠1/1 frequency division ratio
3.3 to 5.5
3
4.1
IDDOP(3)
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠Internal medium speed RC oscillation
mA
stopped.
⢠System clock set to internal high speed
3.3 to 5.5
9.2
11
RC oscillation (20MHz).
⢠1/1 frequency division ratio
IDDOP(4)
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠Internal high speed RC oscillation stopped.
⢠System clock set to internal medium speed
3.3 to 5.5
0.5
0.7
RC oscillation.
⢠1/2 frequency division ratio
IDDOP(5)
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠System clock set to 32.768kHz crystal
oscillation.
⢠All internal RC oscillation stopped.
3.3 to 5.5
32
74 μA
⢠1/1 frequency division ratio
HALT mode
consumption
current
(Note 10-1)
IDDHALT(1)
VDD1,
VDD2
⢠HALT mode
⢠FmCF=20MHz ceramic oscillation mode
⢠System clock set to 20MHz side
⢠All internal RC oscillation stopped.
3.3 to 5.5
4.7
5.8
(Note 10-2)
⢠1/1 frequency division ratio
IDDHALT(2)
⢠HALT mode
⢠FmCF=4MHz ceramic oscillation mode
⢠System clock set to 4MHz side
⢠All internal RC oscillation stopped.
⢠1/1 frequency division ratio
3.3 to 5.5
1.5
2.3
IDDHALT(3)
⢠HALT mode
⢠FsXâtal=32.768kHz crystal oscillation
mA
mode
⢠Internal medium speed RC oscillation
stopped.
3.3 to 5.5
4
5
⢠System clock set to internal high speed
RC oscillation (20MHz).
⢠1/1 frequency division ratio
IDDHALT(4)
⢠HALT mode
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠Internal high speed RC oscillation stopped.
⢠System clock set to internal medium speed
3.3 to 5.5
0.3
0.45
RC oscillation.
⢠1/2 frequency division ratio
IDDHALT(5)
⢠HALT mode
⢠FsXâtal=32.768kHz crystal oscillation mode
⢠System clock set to 32.768kHz crystal
oscillation.
⢠All internal RC oscillation stopped.
3.3 to 5.5
16
60 μA
⢠1/1 frequency division ratio
Note10-1: Values of the consumption current do not include current that flows into the output transistors and internal
pull-up resistors.
Note10-2: The consumption current values do not include operational current of LVD function if not specified.
Continued on next page.
No.A1828-19/25
|
▷ |