CAT34C02VP2IGT4A Datasheet, PDF (14/14 Pages) ON Semiconductor – 2 kb I2C EEPROM for DDR2 DIMM Serial Presence Detect

CAT34C02
Example of Ordering Information
CAT34C02 (Note 16)
Prefix
Device #
Suffix
CAT
34C02
Y
I
−G
T5
Company ID
Product Number
34C02
Temperature Range
I = Industrial (−40°C to +85°C)
Package
Y: TSSOP
VP2: TDFN (Note 19)
HU3: UDFN (Note 19)
HU4: UDFN
Lead Finish
G: NiPdAu Lead Plating
Tape & Reel (Note 22)
T: Tape & Reel
4: 4000/Reel (Note 17)
5: 5000/Reel (Note 18)
14. All packages are RoHS−compliant (Lead−free, Halogen−free)
15. The standard lead finish is NiPdAu.
16. The device used in the above example is a CAT34C02YI−GT5 (TSSOP, Industrial Temperature, NiPdAu, 5000 pcs / Reel)
17. The TDFN and UDFN packages are available in 4000 pcs/Reel (i.e., CAT34C02VP2I−GT4, CAT34C02HU3I−GT4, CAT34C02HU4I−GT4).
18. The TSSOP (Y) package (i.e., CAT34C02YI−GT5) is available in 5000 pcs / Reel.
19. Not recommended for new designs. Please replace with UDFN 2 x 3 mm (HU4) package.
20. For Gresham ONLY die, please order the OPNs: CAT34C02YI-GT5A, CAT34C02VP2IGT4A, CAT34C02HU3IGT4A or
CAT34C02HU4IGT4A.
21. For additional package and temperature options, please contact your nearest ON Semiconductor Sales office.
22. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
ON Semiconductor is licensed by Philips Corporation to carry the I²C Bus Protocol.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
14
CAT34C02/D