NCP1632 Datasheet, PDF (1/25 Pages) ON Semiconductor – Interleaved, 2-Phase Power Factor Controller

NCP1632
Interleaved, 2-Phase Power
Factor Controller
The NCP1632 integrates a dual MOSFET driver for interleaved
PFC applications. Interleaving consists of paralleling two small
stages in lieu of a bigger one, more difficult to design. This approach
has several merits like the ease of implementation, the use of smaller
components or a better distribution of the heating.
Also, Interleaving extends the power range of Critical Conduction
Mode that is an efficient and cost−effective technique (no need for
low t_rr diodes). In addition, the NCP1632 drivers are 180° phase
shifted for a significantly reduced current ripple.
Housed in a SOIC16 package, the circuit incorporates all the
features necessary for building robust and compact interleaved PFC
stages, with a minimum of external components.
General Features
• Near−Unity Power Factor
• Substantial 180° Phase Shift in All Conditions Including Transient
Phases
• Frequency Clamped Critical Conduction Mode (FCCrM) i.e.,
Fixed Frequency, Discontinuous Conduction Mode Operation with
Critical Conduction Achievable in Most Stressful Conditions
• FCCrM Operation Optimizes the PFC Stage Efficiency Over the
Load Range
• Out−of−phase Control for Low EMI and a Reduced rms Current in
the Bulk Capacitor
• Frequency Fold−back at Low Power to Further Improve the Light
Load Efficiency
• Accurate Zero Current Detection by Auxiliary Winding for Valley
Turn On
• Fast Line / Load Transient Compensation
• High Drive Capability: −500 mA / +800 mA
• Signal to Indicate that the PFC is Ready for Operation
(“pfcOK” Pin)
• V_CC Range: from 10 V to 20 V
Safety Features
• Output Over and Under Voltage Protection
• Brown−Out Detection with a 500−ms Delay to Help Meet Hold−up
Time Specifications
• Soft−Start for Smooth Start−up Operation
• Programmable Adjustment of the Maximum Power
• Over Current Limitation
• Detection of Inrush Currents
Typical Applications
• Computer Power Supplies
• LCD / Plasma Flat Panels
• All Off Line Appliances Requiring Power Factor Correction
www.onsemi.com
MARKING DIAGRAM
SOIC−16
D SUFFIX
CASE 751B
A
WL
Y
WW
G
NCP1632G
AWLYWW
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
PIN ASSIGNMENT
ZCD2
1
FB
ZCD1
REF5V/pfcOK
Rt
OSC
DRV1
GND
Vcontrol
FFOLD
Vcc
DRV2
BO
OVP / UVP
(Top View)
Latch
CS
ORDERING INFORMATION
Device
Package
Shipping^†
NCP1632DR2G SOIC−16 2500 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2017
1
July, 2017 − Rev. 0
Publication Order Number:
NCP1632/D