MC74HC595A_16 Datasheet, PDF (1/13 Pages) ON Semiconductor – 8-Bit Serial-Input/Serial or Parallel-Output Shift Register

MC74HC595A
8-Bit Serial-Input/Serial or
Parallel-Output Shift
Register with Latched
3-State Outputs
High−Performance Silicon−Gate CMOS
The MC74HC595A consists of an 8−bit shift register and an 8−bit
D−type latch with three−state parallel outputs. The shift register
accepts serial data and provides a serial output. The shift register also
provides parallel data to the 8−bit latch. The shift register and latch
have independent clock inputs. This device also has an asynchronous
reset for the shift register.
The HC595A directly interfaces with the SPI serial data port on
CMOS MPUs and MCUs.
Features
• Output Drive Capability: 15 LSTTL Loads
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 mA
• High Noise Immunity Characteristic of CMOS Devices
• In Compliance with the Requirements Defined by JEDEC
Standard No. 7 A
• Chip Complexity: 328 FETs or 82 Equivalent Gates
• Improvements over HC595
♦ Improved Propagation Delays
♦ 50% Lower Quiescent Power
♦ Improved Input Noise and Latchup Immunity
• NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free and are RoHS Compliant
www.onsemi.com
SOIC−16
D SUFFIX
CASE 751B
TSSOP−16
DT SUFFIX
CASE 948F
1
QFN16
MN SUFFIX
CASE 485AW
MARKING DIAGRAMS
16
HC595AG
AWLYWW
1
SOIC−16
16
HC
595A
ALYWG
G
1
TSSOP−16
595A
ALYWG
G
QFN16*
*V595A marking used for
NLV74HC595AMN1TWG
A
WL, L
YY, Y
WW, W
G, G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
December, 2016 − Rev. 23
Publication Order Number:
MC74HC595A/D