MBRS410ET3_05 Datasheet, PDF (1/4 Pages) ON Semiconductor – Surface Mount Schottky Power Rectifier

MBRS410ET3
Preferred Device
Surface Mount
Schottky Power Rectifier
This device employs the Schottky Barrier principle in a large area
metal−to−silicon power diode. State−of−the−art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification, or
as free wheeling and polarity protection diodes, in surface mount
applications where compact size and weight are critical to the system.
Typical applications are AC−DC and DC−DC converters, reverse
battery protection, and “ORing” of multiple supply voltages and any
other application where performance and size are critical.
Features
• Very Low V_F Accompanied by Low I_R
• 1st in the Market Place with a 10 V_R Schottky Rectifier
• Small Compact Surface Mountable Package with J−Bend Leads
• Rectangular Package for Automated Handling
• Highly Stable Oxide Passivated Junction
• Designed for Low Leakage
• Excellent Ability to Withstand Reverse Avalanche Energy Transients
• Guard−Ring for Stress Protection
• Pb−Free Package is Available
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 217 mg (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Polarity: Notch in Plastic Body Indicates Cathode Lead
• ESD Ratings: Machine Model = C
Human Body Model = 3B
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(@ T_L = 130°C)
V_RRM
10
V
V_RWM
V_R
I_O
4.0
A
Non−Repetitive Peak Surge Current
I_FSM
250
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Operating Junction Temperature
T_J
−65 to +150 °C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIERS
4.0 AMPERES, 10 VOLTS
SMC
CASE 403
PLASTIC
MARKING DIAGRAM
AYWW
B4E1G
G
B4E1 = Specific Device Code
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping^†
MBRS410ET3
SMC
2500/Tape & Reel
MBRS410ET3G
SMC
2500/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.
© Semiconductor Components Industries, LLC, 2005
1
August, 2005 − Rev. 2
Publication Order Number:
MBRS410ET3/D