E3SCT11D5M Datasheet, PDF (8/10 Pages) Omron Electronics LLC – Oil-resistant, Long-range Photoelectric Sensor with Metal Housing

Dimensions
Sensors
Through-beam (Horizontal)
E3S-CT11(-M1J)
E3S-C
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
With Mounting Bracket Attached
Pre-wired Connector (-M1J)
4-dia. vinyl-insulated round cable
Standard length: 300 mm
M12 × 1
18.5
50
*2
Light indicator (red)
M3 × 5
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm² (AWG 24),
Insulator diameter: 1.2 mm),
Standard length: 2 m *3
20 20.4
Emitter: E3S-CT@@-L
Receiver: E3S-CT@@-D
Lens (17 × 11)
Optical axis
22.2 _Stability
indicator
(green)
9.2
2.2
20
4.2
4.2
8.3
Stainless steel
(SUS304)
6.2
38.2
Mounting Holes
Two, M4
25.4
23
A*1
4
18
9.3
Two, M4 _1.5
20.8
25.4
29.5
17.3
*1. The Mounting Bracket can be attached to side A.
*2. The Emitters for Through-beam Sensors only have the power indicator (red).
*3. The Emitter cable is 4-dia.vinyl-insulated round cable with 2 conductors (conductor cross section: 0.3 mm²,
insulator diameter: 1.3 mm) and a standard length of 2 m.
Note: Models numbers for Through-beam Sensors (E3S-CT11(-M1J)) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-CT11-L 2M), the model number of the Receiver, by adding "-D"ޓ
(example: E3S-CT11-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
8