E3SCT11D5M Datasheet, PDF (3/10 Pages) Omron Electronics LLC – Oil-resistant, Long-range Photoelectric Sensor with Metal Housing

Ratings and Specifications
E3S-C
Sensing
method
Through-beam
Retro-reflective
(with M.S.R. function) *1
Diffuse reflective
Item
Model
Horizontal
E3S-CT11(-M1J)
Vertical
E3S-CT61(-M1J)
Horizontal
E3S-CR11(-M1J)
Vertical
E3S-CR61(-M1J)
Horizontal
E3S-CD11(-M1J)
Vertical
E3S-CD61(-M1J)
Horizontal
E3S-CD12(-M1J)
Vertical
E3S-CD62(-M1J)
Sensing distance
30 m
3 m (when using E39-R1)
700 mm
(300 × 300 mm
white paper)
2m
(300 × 300 mm
white paper)
Standard sensing
object
Opaque, 15-mm dia. min. Opaque, 75-mm dia. min.
---
Differential travel
---
20% max. of sensing distance
Directional angle
Emitter and Receiver: 3°
to15°
3° to 10°
---
Light source
(wavelength)
Infrared LED (880 nm)
Red LED (700 nm)
Infrared LED (880 nm)
Power supply voltage 10 to 30 VDC including 10% (p.p) ripple
Current consumption
50 mA max. (Emitter 25 mA
max. Receiver 25 mA max.)
40 mA max.
Control output
Load power supply voltage: 30 VDC max.
Load current: 100 mA max. (Residual voltage: NPN output: 1.2 V max., PNP output: 2.0 V max.)
Open controller output (NPN/PNP selectable)
Light-ON/Dark-ON selectable
Protection circuits
Power supply reverse polari-
ty circuit protection, Output
short-circuit protection
Power supply reverse polarity protection, Output short-circuit protection,
Mutual interference prevention
Response time
Operate or reset: 1 ms max.
Operate or reset 2 ms max.
Sensitivity
adjustment
One-turn adjuster
Two-turn endless adjuster with an indicator
Ambient illumination Incandescent lamp: 5,000 lx max.
(Receiver side)
Sunlight: 10,000 lx max.
Ambient temperature
range
Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)
Ambient humidity
range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Vibration resistance Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s² for 0.5 hours each in X, Y, and Z directions
Shock resistance
Destruction: 1,000 m/s² 3 times each in X, Y, and Z directions
Degree of protection IEC 60529: IP67 (in-house standards: oil-resistant), NEMA: 6P (indoors only) *2
Connection method Pre-wired (standard cable length: 2 m) or Pre-wired M12 Connector (standard cable length: 0.3 m)
Weight (packed state)
Approx. 270 g
(Pre-wired cable)
Approx. 230 g
(Pre-wired Connector (M12))
Approx. 160 g
(Pre-wired cable)
Approx. 130 g
(Pre-wired Connector (M12))
Approx. 150 g
(Pre-wired cable)
Approx. 110 g
(Pre-wired Connector (M12))
Case
Zinc die-cast
Operation
panel cover
PES (polyether sulfone)
Material
Lens
Methacrylic resin
Mounting
Bracket
Stainless steel (SUS304)
Accessories
Mounting Bracket (with screws), Adjustment screwdriver, Instruction manual, and Reflector (only for Retro-reflective
Sensors)
*1. Refer to MSR function of Technical Guide (Technical version).
*2. NEMA: National Electrical Manufactures Association
3